Load Center | |
---|---|
Max Lifting Height | 16600.0 mm |
Units:
Engine Model | Cat® C4.4 ACERT™* | Cat® C4.4 ACERT™* |
Gross Power - Basic | 142.1 HP | 106.0 kW |
Note | *Meets U.S. EPA Tier 4 Final emission standards. | *Meets U.S. EPA Tier 4 Final emission standards. |
Operating Weight | 34361.0 lb | 15586.0 kg |
Rated Load Capacity | 12000.0 lb | 5443.0 kg |
Maximum Lift Height | 54.6 ft | 16600.0 mm |
Maximum Forward Reach | 42.0 ft | 12.8 m |
Top Travel Speed | 20.5 mile/h | 33.0 km/h |
Capacity at Maximum Height (o/r Down) | 5000.0 lb | 2268.0 kg |
Capacity at Maximum Reach (o/r Down) | 3500.0 lb | 1587.0 kg |
Frame Leveling | 10° | 10° |
Maximum Lift Height (o/r Down) | 54.6 ft | 16.6 m |
Turning Radius - Over Tires | 14.0 ft | 4.3 m |
Drawbar Pull - Loaded | 25605.0 lb | 113.9 kN |
Standard | 400/75-28 Duraforce | 400/75-28 Duraforce |
Optional | 400/75-28 Foam Filled; 14.00-24 Solid; 17.5 × 25 16PR; 17.5 × 25 12PR Foam Filled | 400/75-28 Foam Filled; 14.00-24 Solid; 17.5 × 25 16PR; 17.5 × 25 12PR Foam Filled |
Pump Type | Variable displacement load sensing axial piston pump | Variable displacement load sensing axial piston pump |
Auxiliary Hydraulic Flow | 25.0 gal/min | 95.0 l/min |
Auxiliary Hydraulic Pressure | 3307.0 psi | 228.0 bar |
Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
System Operating Pressure | 3771.0 psi | 260.0 bar |
Fuel Tank | 38.0 gal (US) | 145.0 B |
Diesel Exhaust Fluid (DEF) Tank | 5.7 gal (US) | 21.5 B |
Hydraulic System | 50.0 gal (US) | 189.0 B |
Boom Up | 16.7 s | 16.7 s |
Boom Down | 14.4 s | 14.4 s |
Tele In | 16.3 s | 16.3 s |
Tele Out | 18.5 s | 18.5 s |
Parking Brakes | Wet disc, spring applied hydraulic release on front axle | Wet disc, spring applied hydraulic release on front axle |
Service Brakes | Inboard wet disc brakes on front and rear axles | Inboard wet disc brakes on front and rear axles |
Types (1) | Trunnion mounted planetary 55 degree steer axles. | Trunnion mounted planetary 55 degree steer axles. |
Types (2) | High bias limited slip differential on front axle. | High bias limited slip differential on front axle. |
Forward | 4 speed | 4 speed |
Reverse | 3 speed | 3 speed |
Carriages - Dual Positioning | 50.0 in | 1270.0 mm |
Carriages - Side Shift | 48.0 in | 1220.0 mm |
Carriages - Standard Rotate | 50.0 in | 1270.0 mm |
Carriages - Standard Tilt | 50.0 in | 1270.0 mm |
Carriages - Swing (1) | 100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung) | 100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung) |
Carriages - Swing (2) | 180°, 1824 mm, 5443 kg (180°, 72 in, 12,000 lb) | 180°, 1824 mm, 5443 kg (180°, 72 in, 12,000 lb) |
Carriages - Wide Rotate | 72.0 in | 1829.0 mm |
Carriages - Wide Tilt | 72.0 in | 1829.0 mm |
Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
Fork Extensions* | 90.0 in | 2300.0 mm |
Hydraulic IT Coupler | Includes Auxiliary Electrics | Includes Auxiliary Electrics |
Lumber Forks | [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) | [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) |
Note | *For use with 1829 mm (72 in) Lumber Forks. | *For use with 1829 mm (72 in) Lumber Forks. |
Pallet Forks - Option 1 | [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in) | [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in) |
Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
CATERPILLAR
Name : Cat
Service Tel : (309)578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China