Komatsu AX50 Series Forklift Truck

Komatsu AX50 Series Forklift Truck

Load Center 56 HP @ 2,700 rpm
Max Lifting Height 5.5in
Send Inquiry

Dual Floating Structure

The Komatsu Komfort Zone design uses a dual floating structure that protects operators. One set of vibration-dampening mounts separate the forklift’s frame from the engine and transmission. A second set of suspension mounts isolate the operator compartment from the frame. In addition, drive-train design reduces vibration transmitted from the differential.


EZ View Mast System

Operator visibility is a key to productive forklift operations. The newly designed EZview mast and low-profile dash display gives an unrestricted view of the fork tips and surroundings. In the rear of the AX50, the upper corner of the counterweight angles sharply to give optimum visibility when moving in reverse.


Fully Hydostatic Power Steering

The AX50 Fully Hydrostatic Power Steering system reduces operator fatigue by eliminating kickback and allowing easy steering, even while the forklift is stationary. A small-diameter steering wheel improves operator feel and control.


Angled Exhaust Ports

Hot engine air and exhaust gases are tiring to the operator. On the AX50, angled ports aim hot engine air away from the operator while traveling in reverse. Exhaust vents located low on the counterweight keep exhaust gases away from the operator and also away from the floor to avoid stirring up dust.


High Efficiency Drive Train

A new transmission, designed and manufactured by Komatsu Forklift Limited, handles the high torque provided by the powerful K21 engine. A high-capacity oil cooler protects the torque converter, and an aluminum alloy transmission case improves heat dissipation. O-ring face seals designed for high-temperature, high-speed applications reduces the possibility of leaks in the pump, power steering circuit and torque converter cooler.


KOPS Plus Komatsu Operator Presence System

KOPS Plus – standard on the AX50 – locks out lift, lower, tilt and traveling functions when the operator leaves the seat for more than three seconds. They do not resume until the operator returns to the seat and resets the controls. A flashing yellow warning light alerts the operator when the KOPS lock is activated. In addition, the forks cannot be lowered while the key is in the off position.


General

GENERALFG15HTU-20FG18HTU-20
Power TypeLPGLPG
Operation TypeSit-DownSit-Down
Capacity @ 24 in. (600mm) Load Center3,000 lbs3,500 lbs
Load Distance  From Center Axle (2 Stage)15.4 in15.4 in
Wheelbase55.1 in55.1 in

Weight

WEIGHT FG15HTU-20
 FG18HTU-20
Service Weight6,230 lbs6,700 lbs
Axle LoadingLoaded Front7,190 lbs8,640 lbs

Loaded Rear1,311 lbs1,543 lbs

Unloaded Front2,500 lbs2,360 lbs

Unloaded Rear3,730 lbs4,340 lbs

Tires

TIRESFG15HTU-20FG18HTU-20
Tire TypePneumaticPneumatic
Tire SizeFront6.5 - 10 - 10PR (I)6.5 - 10 - 10PR (I)

Rear5 - 8 - 8PR (I)5 - 8 - 8PR (I)
Number of Wheels, Front/Rear2x / 22x / 2
Tread Front35 in35 in

Rear35.2 in35.2 in


Dimensions

DIMENSIONSFG15HTU-20FG18HTU-20
Tilting Angle, Forward/Backward6 / 8 deg6 / 8 deg
Mast HeightLowered85.5 in85.5 in

Extended176 in176 in
Free Lift Height5.5 in5.5 in
Maximum Fork Height128 in128 in
Height Overhead Guard81.5 in81.5 in
Length, with Standard Forks129.7 in131.3 in
Length to Fork Face87.6 in89.2 in
Overall Width at Drive Tires42.1 in42.1 in
Forks, Thickness x Width x Length1.6 x 4 x 42.1 in1.6 x 4 x 42.1 in
Carriage Width/ITA Class41 in / II41 in / II
Ground Clearance, Under Mast5.5 in5.5 in
Ground Clearance, Center of Wheelbase5.1 in5.1 in
Right Angle Stacking Aisle92.4 in93.7 in
Turning Radius, Outside77 in78.3 in


Performance

PERFORMANCEFG15HTU-20FG18HTU-20
Travel Speed, Loaded/Unloaded11.8 / 12.4 mph11.8 / 12.4 mph
Lifting Speed, Loaded/Unloaded135 / 138 fpm135 / 138 fpm
Lowering Speed, Loaded/Unloaded98 / 98 fpm98 / 98 fpm
Maximum Drawbar Pull, Loaded3,700 lbs3,700 lbs
Maximum Gradeability39%35%
Service Brake, Operation/ControlFoot / HydraulicFoot / Hydraulic
Parking Brake, Operation/ControlHand / MechanicalHand / Mechanical
Steering TypeFHPSFHPS


Drive

DRIVEFG15HTU-20FG18HTU-20
Engine Manufacturer / Engine ModelGCT / K21GCT / K21
Rated Output (SAE Net)56 HP @ 2,700 rpm56 HP @ 2,700 rpm
Maximum Torque (SAE Net)119 lb-ft @ 1,600 rpm119 lb-ft @ 1,600 rpm
# of Cylinders / Displacement4 / 126 cu in4 / 126 cu in
Fuel Tank Capacity11 US Gallons11 US Gallons

Other

OTHERFG15HTU-20FG18HTU-20
Relief Pressure, Maximum2,650 psi2,650 psi
TransmissionPowershiftPowershift
Sound Level 84 dB84 dB


Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China