Sunward SWRT55 Rough terrain  crane

Sunward SWRT55 Rough terrain crane

Complete vehicle mass 44600
Send Inquiry

SWRT55 rough terrain crane has the advantages of big ground clearance, wide wheelspan, good stability, short wheelbase and small turning radius,

therefore it is specially suitable for lifting operation in narrow workplaces. It is capable of 360°full circle swinging lifting operation, in

addition, it can operate without outrigger and travel with load. This product is widely applied in load hoisting operation at workplaces including

construction field, outdoor oilfield,warehouse, goods yard, logistics base & wharf etc. and hoisting & travelling operation for short-distance

transition & narrow space.

SWRT55 rough terrain crane consists of special chassis and lifting operation units including imported power system, transmission system, suspension

system, steering system, braking system, hoisting mechanism, luffing mechanism, swing mechanism, boom system, rotary table, frame, outrigger,

hydraulic system, electrical system and operator cabin etc. The crane has 41.5-dead weight ton, the outside dimension of whole machine is

13650×3300×3750mm, the maximum lifting load is 55t, the maximum lifting height is about 42.5m(distance to
overhead pulley center), the maximum lifting height of jib is 59.1m, the maximum travel speed is 40km/h,it has the characteristics of cross-

country running, capability of three steering control methods including all-wheel steering, fourwheel steering & crabbing and travelling with load

in lifting operation etc.

All-wheel drive,ampleground clearance,strong cross-country performance and suitability for traveling in various road conditions.

Travelling with load, it can hoist up to 16.8 tons of loads in travelling.

Multiple kinds of telescopic outrigger operation modes, suitability for various kinds of situations and construction sites, capability of operation

with full- extending outrigger, half-extending outrigger, full-retracting outrigger or without outrigger

Flexible steering mode sincluding two-wheel steering, crabbing and all-wheel steering, short wheelbase, short turning radius, strong flexibility

and suitability for travelling & operation in narrow space.

Advanced control system, utilizing 3B6 control system with global service, capability of detection of outrigger state, rotation angle and
boom system state, safety system of torque limiting, overloading warning, overwinding protection and chassis tilting warning & limitation, in

addition, upcarriage and carriage bus control system & fault detection coding etc.


TypeItemUnitSWRT25J
Dimension    parametersOutline dimensions(L×W×H)mm13640×3280×3750
Wheelbasemm4000
Wheelspanmm2605
Outrigger span(horizontal×vertical)mm7200×7200
Main boom lengthmm11300~42500
Jib lengthmm9500~16000
Main boom elevation angle°-3.5~78
Jib installation angle°0/15/30
Mass parametersCurb weight of whole vehiclekg44600
Front axle carrying masskg22000
Rear axle carrying masskg22600
Power system    parametersEngine model-

ISLe310 30

WP10.290

Engine rated powerkW/rpm

179/2500

213/2200

Engine rated torqueN.m/rpm

1200/1000-1700

1160/1200-1600

Emission standard-

Euro Ⅲ

National Ⅲ

Travelling    parametersMax.travelling speedkm/h40
Min.turning radius(2 wheel/4 wheel)m12.8/7.8
Min.ground clearancemm450
Approach angle°24.7
Departure angle°19
Max.gradeability%70
Min.braking distance(24km/h)m≤9.7
Working performance    parametersMax.rated lifting momentkN.m1865
Max.rated lifting capacitykg55000
Min.rated radiusm3
Max.lifting height of basic boommm12520
Max.lifting height of longest main    boommm42550
Max.lifting height of longest jibmm59100
Operating speed    parametersMax.lifting speed of main winch single rope (idle load)m/min130
Fully extending/retracting time of    lifting booms70/140
Raising/Lowering time of lifting booms54/54
Max.slewing speedr/min<2.6
Full extending/retracting time of    horizontal outriggerss15/12
Full extending/retracting time of    vertical outriggerss30/25

 

TypeItemUnitSWRT25J
Dimension    parametersOutline dimensions(L×W×H)mm13640×3280×3750
Wheelbasemm4000
Wheelspanmm2605
Outrigger span(horizontal×vertical)mm7200×7200
Main boom lengthmm11300~42500
Jib lengthmm9500~16000
Main boom elevation angle°-3.5~78
Jib installation angle°0/15/30
Mass parametersCurb weight of whole vehiclekg44600
Front axle carrying masskg22000
Rear axle carrying masskg22600
Power system    parametersEngine model-

ISLe310 30

WP10.290

Engine rated powerkW/rpm

179/2500

213/2200

Engine rated torqueN.m/rpm

1200/1000-1700

1160/1200-1600

Emission standard-

Euro Ⅲ

National Ⅲ

Travelling    parametersMax.travelling speedkm/h40
Min.turning radius(2 wheel/4 wheel)m12.8/7.8
Min.ground clearancemm450
Approach angle°24.7
Departure angle°19
Max.gradeability%70
Min.braking distance(24km/h)m≤9.7
Working performance    parametersMax.rated lifting momentkN.m1865
Max.rated lifting capacitykg55000
Min.rated radiusm3
Max.lifting height of basic boommm12520
Max.lifting height of longest main    boommm42550
Max.lifting height of longest jibmm59100
Operating speed    parametersMax.lifting speed of main winch single rope (idle load)m/min130
Fully extending/retracting time of    lifting booms70/140
Raising/Lowering time of lifting booms54/54
Max.slewing speedr/min<2.6
Full extending/retracting time of    horizontal outriggerss15/12
Full extending/retracting time of    vertical outriggerss30/25

 

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China