Komatsu BX50 Series Forklift Truck

Komatsu BX50 Series Forklift Truck

Load Center 4,000 lbs-6,500 lbs
Max Lifting Height 5.5 in
Send Inquiry

Dual Floating Structure

The Komatsu Komfort Zone is a dual floating structure that protects operators through advanced ergonomic design and reduces the effects of engine vibration, noise and heat. Vibration-dampening mounts separate the engine and transmission from the forklift’s frame. Additional suspension mounts isolate the operator compartment from the frame. The heavy-gauge steel frame, front axle and heavy front fender connect to deliver high strength—critical for high lifting and heavy loads.


EZ View Mast System

With the excellent visibility window on the EZview mast, the BX50 operator has an unrestricted view of the fork tips and surroundings. Towards the front, the newly designed EZview mast, console and low-profile dash give maximum visibility. To the rear, the upper corners of the counterweight are angled for clear sightlines in reverse.


Fully Hydostatic Power Steering

Even when the BX50 is sitting still, its Fully Hydrostatic Power Steering (FHPS) system allows east steering. The FHPS system also reduced operator fatigue by eliminating kickback. Operator feel and control are improved by a small-diameter steering wheel and an optional spinner knob allows easier, one-handed steering.


Angled Exhaust Ports

Hot engine air and exhaust gases are tiring to the operator. On the BX50, angled ports aim hot engine air away from the operator while traveling in reverse. Exhaust vents located low on the counterweight keep exhaust gases away from the operator and also away from the floor to avoid stirring up dust.


High Efficiency Drive Train

The high torque delivered by the BX50’s powerful K21 and K25 engines is channeled through a new transmission designed and manufactured by Komatsu. This rugged new drive train features an aluminum alloy transmission case for improved heat dissipation, a high-capacity oil cooler or torque converter, and O-ring face seals to greatly reduce the possibility of leaks. Komatsu’s extensive experience with demanding construction machinery applications led to a highly reliable, highly dust-resistant, double-seal universal joint design in the full floating BX50 drive train.


KOPS Plus Komatsu Operator Presence System

KOPS Plus – standard on the BX50 – locks out lift, lower, tilt and traveling functions when the operator leaves the seat for more than three seconds. They do not resume until the operator returns to the seat and resets the controls. A flashing yellow warning light alerts the operator when the KOPS lock is activated. In addition, the forks cannot be lowered while the key is in the off position.


General

GENERALFG20T-16FG25T-16FG25HT-16FG30HT-16FG32HT-16
Power TypeLPGLPGLPGLPGLPG 
Operation TypeSit-DownSit-DownSit-DownSit-DownSit-Down
Capacity @ 24 in. (600mm) Load Center4,000 lbs5,000 lbs5,000 lbs6,000 lbs6,500 lbs
Load Distance  From Center Axle (2 Stage)17.9 in17.9 in17.9 in19.1 in19.1 in
Wheelbase65 in 65 in 65 in 66.9 in66.9 in


Weight

WEIGHTFG20T-16FG25T-16FG25HT-16FG30HT-16FG32HT-16
Service Weight7,180 lbs7,941 lbs7,941 lbs9,405 lbs9,791 lbs
Axle LoadingLoaded Front9,880 lbs11,360 lbs11,360 lbs13,510 lbs14,200 lbs

Loaded Rear1,300 lbs1,590 lbs1,590 lbs1,910 lbs2,110 lbs

Unloaded Front3,270 lbs3,110 lbs3,110 lbs3,600 lbs3,480 lbs

Unloaded Rear3,900 lbs4,840 lbs4,840 lbs5,810 lbs6,320 lbs


Tires

TIRESFG20T-16FG25T-16FG25HT-16FG30HT-16FG32HT-16
Tire TypePneumaticPneumaticPneumaticPneumaticPneumatic
Tire SizeFront7 - 12 - 12PR 7 - 12 - 12PR 7 - 12 - 12PR 28 x 9 - 15 - 12PR (I)28 x 9 - 15 - 12PR (I)

Rear6 - 9 - 10PR 6 - 9 - 10PR 6 - 9 - 10PR 6.5 - 10 - 10PR6.5 - 10 - 10PR
Number of Wheels, Front/Rear2x / 22x / 22x / 22x / 22x / 2
Tread Front38 in38 in38 in40.4 in40.4 in

Rear37.8 in37.8 in37.8 in38 in38 in


Dimensions

DIMENSIONSFG20T-16FG25T-16FG25HT-16FG30HT-16FG32HT-16
Tilting Angle, Forward/Backward6 / 12 deg6 / 12 deg6 / 12 deg6 / 12 deg6/ 12 deg
Mast HeightLowered85.4 in85.4 in85.4 in85 in88.6 in

Extended176 in176 in176 in176 in176 in
Free Lift Height5.5 in5.5 in5.5 in5.5 in5.5 in
Maximum Fork Height128 in128 in128 in128 in128 in
Height Overhead Guard83.1 in83.1 in83.1 in83.9 in83.9 in
Length, with Standard Forks141.5 in144.5 in144.5 in148.8 in150.6 in
Length to Fork Face99.4 in102.4 in102.4 in106.7 in108.5 in
Overall Width at Drive Tires45.3 in45.3 in45.3 in48.6 in48.6 in
Forks, Thickness x Width x Length1.6 x 3.9 x 42 in1.6 x 3.9 x 42 in1.6 x 3.9 x 42 in2 x 4.9 x 42 in2 x 4.9 x 42 in
Carriage Width/ITA Class40.9 in / II40.9 in / II40.9 in / II41 in / III42.1 in / III
Ground Clearance, Under Mast5.5 in5.5 in5.5 in5.5 in5.5 in
Ground Clearance, Center of Wheelbase6.2 in6.2 in6.2 in7.3 in7.3 in
Right Angle Stacking Aisle104.1 in106.1 in106.1 in112.4 in114.4 in
Turning Radius, Outside86.2 in88.2 in88.2 in93.3 in95.3 in


Performance

PERFORMANCEFG20T-16FG25T-16FG25HT-16FG30HT-16FG32HT-16
Travel Speed, Loaded/Unloaded11.2 / 11.8 mph11.2 / 11.8 mph11.2 / 11.8 mph11.5 / 12.1 mph10.9 / 11.5 mph
Lifting Speed, Loaded/Unloaded120 / 124 fpm120 / 124 fpm120 / 124 fpm104 / 124 fpm104 / 114 fpm
Lowering Speed, Loaded/Unloaded98 / 98 fpm98 / 98 fpm98 / 98 fpm98 / 98 fpm98 / 98 fpm
Maximum Drawbar Pull, Loaded3,960 lbs3,960 lbs4,720 lbs4,630 lbs4,630 lbs
Maximum Gradeability32%27%34%27%25%
Service Brake, Operation/ControlFoot / HydraulicFoot / HydraulicFoot / HydraulicFoot / HydraulicFoot / Hydraulic
Parking Brake, Operation/ControlHand / MechanicalHand / MechanicalHand / MechanicalHand / MechanicalHand / Mechanical
Steering TypeFHPSFHPSFHPSFHPSFHPS


Drive

DRIVEFG20T-16FG25T-16FG25HT-16FG30HT-16FG32HT-16
Engine Manufacturer / Engine ModelGCT / K21GCT / K21GCT / K25GCT / K25GCT / K25
Rated Output (SAE Net)56 HP @ 2,700 rpm56 HP @ 2,700 rpm60 HP @ 2,700 rpm60 HP @ 2,700 rpm60 HP @ 2,700 rpm
Maximum Torque (SAE Net)119 lb-ft @ 1,600 rpm119 lb-ft @ 1,600 rpm142 lb-ft @ 1,600 rpm142 lb-ft @ 1,600 rpm142 lb-ft @ 1,600 rpm
# of Cylinders / Displacement4 / 126 cu in4 / 126 cu in4 / 152 cu in4 / 152 cu in4 / 152 cu in
Fuel Tank Capacity15.3 US Gallons15.3 US Gallons15.3 US Gallons15.3 US Gallons15.3 US Gallons

Other

OTHERFG20T-16FG25T-16FG25HT-16FG30HT-16FG32HT-16
Relief Pressure, Maximum2,650 psi2,650 psi2,650 psi2,650 psi2,650 psi
TransmissionPowershiftPowershiftPowershiftPowershiftPowershift
Sound Level 82dB82dB83dB83dB83dB


Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China