Mechanical-Front-Wheel Drive

Mechanical-front-wheel drive (MFWD) and differential lock can be engaged on-the-go to give extra traction in poor underfoot conditions or for moving heavy loads. Optional limited-slip front axle delivers 65 percent of available power to the tire with the best traction. For true all-wheel-drive pulling power.

Engine

The 210L EP Interim Tier 4 (IT4)/Stage IIIB emission-certified Yanmar 3.3L engine requires no aftertreatment.

Field-proven technology is simple, fluid efficient, fully integrated, and fully supported. It employs cooled exhaust gas recirculation and selective catalytic reduction.

Eco Mode

Standard economy mode helps maximize fuel usage in lighter-work applications with minimal effect on machine performance.

Ride Control

With ride control activated, front loader hydraulic cylinders act as a shock absorber, smoothing travel over rough terrain, helping full loads reach their destination, and reducing operator fatigue.

Productivity

New hitch design makes it easier to position the box blade over the pile for more versatility and productivity.

Integral three-point hitch accommodates a variety of tools

Operator Comfort

Choose cab or open operator station.

Higher canopy with wider and lower step provides better visibility over the hood and to the corners of the front bucket, as well as to the rear box blade. Makes it easier to service under-canopy components, too.

Easy Maintenance

Two-position tilt hood provides same-side ground-level access to engine and transmission dipsticks, engine-oil fill, fuel and air filters, and coolant reservoir. Fuel fill is also closely convenient.

DRIVELINE

Engine manufacturer	John Deere
Engine model	PowerTech E 4045HT072
Emission rating	Interim Tier 4
Displacement, ltr (Inches³)	4.5 (276)
Rated speed, rpm	1900
Net output, kW (hp)	52 (70)
Transmission type	Power Shift
Number of speeds - forward	4
Number of speeds - reverse	2
Front axle type	Mechanical FWD
Service type	Wet Multi Disc
Service actuation	Hydraulic w/Power Assist

DIMENSIONS

Overall length, mm (ft/in)	5310 (17 ft 5 in)
Minimum transport height, mm (ft/in)	2620 (8 ft 7 in)
Overall width, mm (ft/in)	2130 (7 ft )
Std shovel width, mm (inches)	2184 (86)
Dump Clearance @ 45 deg, mm (ft/in)	2740 (9 ft )
Dump Reach, mm (inches)	699 (27.5)
Bucket Hinge Pin - Max Height, mm (ft/in)	3340 (10 ft 11 in)
Coupler	Pin-On

CAPACITIES

Fuel tank capacity, ltr (gallons (US))	117.3 (31)
Hydraulic tank capacity, ltr (gallons (US))	45 (11.9)
Shovel cap SAE heaped, m³ (yd³)	0.86 (1.12)
Alternator capacity, Amp	90

PERFORMANCE

Max. Forward Speed, kph (mph)	31.7 (19.7)
Max. Reverse Speed, kph (mph)	12.9 (7.8)
Lift Capacity to Full Height, kg (lbs)	2466 (5432)
Oscillation angle, ± °	22
Power Take Off	No
Breakout force std shovel, kN (lbf)	38.7 (8700)
System voltage, V	12
Pump type	Gear
Pump flow, lt/min (gallons (US) / min)	78 (20.5)
System pressure, bar (PSI)	189.61 (2750)

WEIGHTS

Operating weight, kg (lbs)	4794 (10569)