Customized DANA transmission:

The DANA axis-shift transmission with electronic control system is used for automatic shifting, maximum efficiency and 10k-hour service life.

F/R handle and fingertips control realize ease of switch between left and right hands.

Solenoid valve + logic control achieve a much smoother shifting and faster response.

High-pressure load-sensitive hydraulic system:

Perfect match between speed and power, 10%-15% energy saving.

The 25MPa high-pressure hydraulic system and main valve of large displacement achieves higher breakout and lifting force.

Reinforced structural components:

For heavy-duty mining applications with a service life reaching 10k hours.

 

Model	DEUTZ TCD7.8L6
Power	170/1800 kW/rpm
Torque	962 ft lbs/1304Nm/1450rpm
No. of cyliners	6
Displacement	7.8L
Bore x Stroke	110mm x 136mm
Hydraulic System Type	Load sensing hydraulic system
Pump	Implement - Kawasaki Steering - Eaton/Danfoss
Max. flow	81 GPM / 132L/min @ 2200rpm
System pressure	3916 PSI / 27MPa
Cycle time	10.6 s
Gear-shift model	Automatic, Manual, KD
Travel speed	forward 4.4/8/16/25 mph, reverse 4.4/8/16 mph
Service brakes	Wet Disk
Parking brake	SAHR Disk Brake
Height to axle centerline	440mm
Centerline of rear axle to edge of counterweight	2330mm
Wheelbase	3200mm
Centerline of rear axle to hitch	1600mm
Shipping length	6862/8142mm
Max. dump height	5441mm
Hinge pin height at max.lift	4133mm
Dump clearance at max.lift	3118mm
The lowest dump to the ground	56mm
Reach at max.lift and 45° discharge	1140mm
Rack back at max.lift	58°
Dump angle at max.lift	45°
Rack back at carry height	51°
Rack back at ground	45°
Tail angle to the rear wheel	27°
Clearance circle to outside of tires	5800mm
Clearance circle to counterweight	5911mm
Max.circle	6456mm
Bucket width	2975mm