| Operating Weight | 30090.0 kg |
|---|---|
| Rated power | 278.0 kW |
Cat® C13 ACERT™ engine offers increased power density with a combination of proven electronic, fuel and air systems.
Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.
Heavy-duty planetary powershift transmission and axles handle extreme applications.
Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.
Engine power increased by approximately 5% improves machine performance and response (compared to H Series).
Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
Z-bar linkage provides high breakout force at ground level.
Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
Optional limited slip differentials improve performance in the pile and poor underfoot conditions.
Optional Aggregate Handler configuration offers slightly higher payload capability for loose aggregate rehandling.*
*Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.
Up to 10% more fuel efficient than K Series and up to 25% more fuel efficient than H Series loaders.**
Power dense ACERT engine burns less fuel by providing power and torque when needed.
Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.
**Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.
Best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
E-H joystick steering with force feedback for precision control and dramatically decreases operator arm fatigue.
Intuitive, ergonomic controls and touch screen multifunction display keep operators focused on their work.
Ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.
Excellent cab access with wide door, remote door opening option and stair-like steps.
Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.
One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
Safe, ground level access to fuel fill and daily maintenance points means less servicing time is required.
Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.
Monitor, manage and enhance job site operations.
Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increased operator awareness of the working environment which enhances site safety.
Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
The new 980M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 2/EU Stage II equivalent or Tier 3/Stage IIIA equivalent emission standards, depending on emission standards of specific country.
Units:
| Net Power - ISO 9249 | 373.0 HP | 278.0 kW |
| Engine Model | Cat C13 ACERT | Cat C13 ACERT |
| Displacement | 763.0 in³ | 12.5 l |
| Maximum Power - 1,800 rpm - SAE J1995 | 412.0 HP | 307.0 kW |
| Maximum Net Power - 1,800 rpm - ISO 9249 | 373.0 HP | 278.0 kW |
| Maximum Net Power - 1,800 rpm - ISO 9249 - Metric | 378.0 HP | 278.0 kW |
| Maximum Net Power - 1,800 rpm - SAE J1349 | 373.0 HP | 278.0 kW |
| Maximum Net Power - 1,800 rpm - SAE J1349 - Metric | 378.0 HP | 278.0 kW |
| Maximum Net Torque - 1,000 rpm | 1505.0 lb/ft | 2040.0 N·m |
| Maximum Power - 1,800 rpm - ISO 14396 | 406.0 HP | 303.0 kW |
| Maximum Power - 1,800 rpm - ISO 14396 - Metric | 412.0 HP | 303.0 kW |
| Maximum Power - 1,800 rpm - SAE J1995 - Metric | 417.0 HP | 307.0 kW |
| Peak Gross Torque - 1,300 rpm - ISO 14396 | 1602.0 lb/ft | 2172.0 N·m |
| Peak Gross Torque - 1,300 rpm - SAE J1995 | 1617.0 lb/ft | 2192.0 N·m |
| Operating Weight | 66337.0 lb | 30090.0 kg |
| Note | Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7 | Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7 |
| Bucket Capacities | 4.2-12.2 m? (5.25-16.0 yd?) | 4.2-12.2 m? (5.25-16.0 yd?) |
| Breakout Force | 50357.0 lbf | 224.0 kN |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 45847.0 lb | 20796.0 kg |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 43133.0 lb | 19565.0 kg |
| Note (1) | For a machine configuration as defined under ?Weight.? | For a machine configuration as defined under ?Weight.? |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6. | Full compliance to ISO 143971:2007 Sections 1 thru 6. |
| Forward - 1 | 4.3 mile/h | 6.9 km/h |
| Forward - 2 | 8.3 mile/h | 13.3 km/h |
| Forward - 3 | 14.6 mile/h | 23.5 km/h |
| Forward - 4 | 24.5 mile/h | 39.5 km/h |
| Reverse - 1 | 4.8 mile/h | 7.8 km/h |
| Reverse - 2 | 9.4 mile/h | 15.2 km/h |
| Reverse - 3 | 16.7 mile/h | 26.9 km/h |
| Reverse - 4 | 24.5 mile/h | 39.5 km/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius. | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius. |
| Hydraulic Cycle Time - Total | 10.1 s | 10.1 s |
| Implement System - Maximum Operating Pressure | 4975.0 psi | 34300.0 kPa |
| Implement System - Maximum Pump Output at 2,250 rpm | 119.0 gal/min | 449.0 l/min |
| Cooling System | 12.0 gal (US) | 45.0 l |
| Crankcase | 9.8 gal (US) | 37.0 l |
| Differential - Final Drives - Front | 22.0 gal (US) | 84.0 l |
| Differential - Final Drives - Rear | 22.0 gal (US) | 84.0 l |
| Fuel Tank | 112.5 gal (US) | 426.0 l |
| Hydraulic Tank | 40.0 gal (US) | 153.0 l |
| Transmission | 20.3 gal (US) | 77.0 l |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 112.0 dB(A) | 112.0 dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 78 dB(A)* | 78 dB(A)* |
| With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 75.0 dB(A) | 75.0 dB(A) |
| Bucket Range | 4.2-12.2 m? (5.25-16.0 yd?) | 4.2-12.2 m? (5.25-16.0 yd?) |
| Centerline of Rear Axle to Edge of Counterweight | 8.17 ft | 2469.0 mm |
| Centerline of Rear Axle to Hitch | 6.25 ft | 1900.0 mm |
| Ground Clearance | 1.42 ft | 453.0 mm |
| Height - Top of Exhaust Pipe | 12.33 ft | 3746.0 mm |
| Height - Top of Hood | 10.25 ft | 3110.0 mm |
| Height - Top of ROPS | 12.58 ft | 3813.0 mm |
| Hinge Pin Height at Carry | 2.25 ft | 678.0 mm |
| Hinge Pin Height at Maximum Lift | 15.58 ft | 4760.0 mm |
| Lift Arm Clearance at Maximum Lift | 13.08 ft | 4010.0 mm |
| Maximum Width over Tires | 10.83 ft | 3296.0 mm |
| Note | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. |
| Overall Length - Without Bucket | 26.83 ft | 8164.0 mm |
| Rack Back - Carry Height | 48 degrees | 48 degrees |
| Rack Back - Maximum Lift | 61 degrees | 61 degrees |
| Rack Back at Ground | 39 degrees | 39 degrees |
| Tread Width | 8.0 ft | 2440.0 mm |
| Wheel Base | 12.5 ft | 3800.0 mm |
| Centerline of Rear Axle to Edge of Counterweight | 8.17 ft | 2469.0 mm |
| Centerline of Rear Axle to Hitch | 6.25 ft | 1900.0 mm |
| Ground Clearance | 1.42 ft | 453.0 mm |
| Height - Top of Exhaust Pipe | 12.33 ft | 3746.0 mm |
| Height - Top of Hood | 10.25 ft | 3110.0 mm |
| Height - Top of ROPS | 12.58 ft | 3813.0 mm |
| Hinge Pin Height at Carry | 2.08 ft | 621.0 mm |
| Hinge Pin Height at Maximum Lift | 14.83 ft | 4539.0 mm |
| Lift Arm Clearance at Maximum Lift | 12.42 ft | 3795.0 mm |
| Maximum Width over Tires | 10.83 ft | 3296.0 mm |
| Note | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. |
| Overall Length - Without Bucket | 26.17 ft | 7964.0 mm |
| Rack Back - Carry Height | 48 degrees | 48 degrees |
| Rack Back - Maximum Lift | 61 degrees | 61 degrees |
| Rack Back at Ground | 40 degrees | 40 degrees |
| Tread Width | 8.0 ft | 2440.0 mm |
| Wheel Base | 12.5 ft | 3800.0 mm |
CATERPILLAR
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
