| Rated rpm | 2200 rpm |
|---|---|
| Operating Weight | 21,675 lb 9830 kg |
The D39EX/PX-23 incorporates Komatsu’s super-slant nose design. Komatsu’s innovative design provides excellent blade visibility for improved machine control and increased efficiency and productivity.
The D39-23 incorporates new proprietary engine and hydrostatic transmission pump control technology to improve operational efficiency and reduce fuel consumption to levels lower than a conventional HST control system can obtain. This Komatsu exclusive feature reduces fuel consumption by up to 10% in P mode in demanding working conditions and up to 20% in E mode under lighter load conditions as compared to the prior model.
Powerful turns under various work conditions are achieved with the new HST transmission, even under load. Counter-rotation is available for minimum turning radius, providing excellent maneuverability in tight spots.
The D39-23 offers two gearshift modes: Variable and the new Customizable Quick shift. Variable shift mode provides 20 incremental speed settings for the operator, while the new Customizable Quick shift provides 3 speed settings; all can be adjusted in the monitor to obtain the right speed for different operator preferences.
Machine operation becomes simple because brake function has been integrated into decelerator pedal. Machine moving speed including/excluding engine speed can be controllable by using only one pedal of decelerator/brake pedal. Operation of pedal function can be changed by the mode selector switch.
The pedal can decelerate engine RPMS and vehicle travel speed. Normally can be used for all applications.
The pedal can decelerate vehicle travel speed, keeping high engine revolution. This mode can be helpful to keep work equipment controllability and/or force, even during braking.
Working mode E is for general dozing applications with adequate speed and power while reducing fuel consumption and CO2. Working mode P is aimed at powerful operation and maximum production. The working mode is easily switched on the monitor panel, depending on the work at hand.
With E mode, the engine outputs enough power for most general dozing applications without delivering unnecessary power. This mode allows for energy saving operation and is suitable for work on ground where the machine may experience shoe slip or applications not requiring large power such as downhill dozing, leveling and light-load work.
With P mode, the engine outputs its full power, allowing the machine to perform large production, heavy-load, or uphill work.
A Power Angle Tilt dozer blade with highly durable box-structure frame is available for the EX and PX machines. The hydraulic blade tilt and angling functions and manually adjustable blade pitch expand versatility and productivity in a variety of applications. This PAT dozer assembly is tested to stringent test standards.
A new secondary switch has been added, at the side of the front console, to shut down the engine.
In order to support optimum operation, the following 4 recommendations are displayed to improve fuel saving operation:
1) Avoid Excessive Engine Idling
2) Use Economy Mode to Save Fuel
3) Avoid Hydraulic Relief Pressure
4) Avoid Overload
The operator can access the ECO guidance menu to check the Operation Records, Eco Guidance Records, and Average Fuel Consumption logs.
On the large LCD color monitor, the operator can view, through one camera, areas directly behind the machine. This camera can be synchronized with reverse operation.
Palm command travel joystick provides the operator with a relaxed posture and superb fine control. Transmission shifting is simplified with thumb push buttons.
Blade control joystick uses the EPC valve and joystick, similar to the travel control joystick. EPC control combined with the highly reliable Komatsu hydraulic system enables superb fine control. A switch is now used to angle the PAT blade. A button to activate float is also provided.
The D37-23 utilizes a swing-up fan with a gas strut-assisted lift locking system to provide easy access to the (side-by-side) radiator, oil cooler, and charge air cooler. The swing-up feature makes it easier to access cooling cores. The hydraulic fan can rotate in the reverse direction to help remove debris from cooler cores.
All daily checks can be performed efficiently from the left side of the machine.
One of the design goals behind the creation of the D37 was to manufacture a more durable machine. This was achieved by reducing component complexity and using a strong modular design for increased serviceability and durability. Steel castings reduce the number of welds, improving C-frame rigidity and strength.
Komatsu offers a full guarding package to help protect your machine and operator in severe applications.
| Model | Komatsu SAA4D95LE-6* | |
| Type | 4-cycle, water-cooled, direct injection | |
| Aspiration | Variable flow turbocharged, air-to-air aftercooled | |
| Number of cylinders | 4 | |
| Bore x stroke | 3.75" x 4.52" | 95 mm x 115 mm |
| Piston displacement | 199 in³ | 3.26 ltr |
| Governor | All-speed, electronic | |
| Horsepower: | ||
| SAE J1995 - Gross | 107 HP | 79 kW |
| ISO 9249 / SAE J1349 - Net | 105 HP | 78 kW |
| Rated rpm | 2200 rpm | |
| Fan drive type | Hydraulic (reversible) | |
| Lubrication system: | ||
| Method | Gear pump, force lubrication | |
| Filter | Full-flow | |
| *EPA Tier 4 Interim and EU stage 3B emissions certified |
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
| Travel speed (quick shift mode)* | Forward | Reverse |
| 1st | 0–2.1 mph 0–3.4 km/h | 0–2.5 mph 0–4.1 km/h |
| 2nd | 0–3.5 mph 0–5.6 km/h | 0–4.0 mph 0–6.5 km/h |
| 3rd | 0–5.3 mph 0–8.5 km/h | 0–5.3 mph 0–8.5 km/h |
| Travel speed (variable mode) | Forward | Reverse |
| 0–5.3 mph 0–8.5 km/h | 0–5.3 mph 0–8.5 km/h | |
| *Quick shift speeds are adjustable in the monitor. |
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
Palm Command Control System (PCCS) joystick control for all
directional movements. Pushing the joystick forward results in
forward machine travel, while pulling it rearward reverses the
machine. Simply tilt the joystick to the left or right to make a turn.
Tilting the joystick fully to the left or right activates counter-rotation.
Hydrostatic Transmission (HST) provides smooth powerful turns.
Fully electronic control enables smooth control that can be adjusted
in the monitor. The PCCS utilizes shift buttons to increase and
decrease speed.
| Minimum turning radius: | 94" | 2.4 m |
| As measured by track marks on the ground at pivot turn. |
| Suspension | Rigid type | |
| Track roller frame | Monocoque, large section, durable construction | |
| Rollers and idlers | Lubricated track rollers | |
| Sealed and lubricated track | Track tension is easily adjusted with grease gun. | |
| Number of track rollers (each side) | 6 | |
| Type of shoes (standard) | Single grouser | |
| Number of shoes (each side) | 39 | |
| Grouser height | 2.1" | 53 mm |
| Shoe width (standard) | 25" | 635 mm |
| Ground contact area | 4,616 in² | 29782 cm² |
| Ground pressure (with dozer, ROPS cab) | 4.70 psi | 0.33 kgf/cm² / 31.7 kPa |
| Track gauge | 5'11" | 1810 |
| Length of track on ground | 7'8" | 2345 mm |
| Coolant | 9.0 U.S. gal | 34 ltr |
| Fuel tank | 50.2 U.S. gal | 190 ltr |
| Engine oil | 2.9 U.S. gal | 11 ltr |
| Hydraulic tank | 15.8 U.S. gal | 60 ltr |
| Final drive (each side) | 0.9 U.S. gal | 3.5 ltr |
| Tractor weight: | Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. | |
| ROPS cab | 18,982 lb | 8610 kg |
| Operating weight: | Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank. | |
| ROPS cab | 21,675 lb | 9830 kg |
| Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation. | ||
| Hydraulic control unit: | ||
| All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm. | ||
| Relief valve setting | 3,974 psi | 27.4 MPa / 280 kg/cm² |
| Hydraulic cylinders | Double-acting, piston type | |
| Number of cylinders: | Bore | Bore |
| Blade lift / 2 | 3" | 75 mm |
| Blade tilt / 1 | 3.5" | 90 mm |
| Blade angle / 2 | 3.1" | 80 mm |
| Blade pitch | 1 adjustable linkage | |
| Hydraulic oil capacity (refill): | ||
| Power angle tilt dozer | 15.9 U.S. gal | 60 ltr |
| Control valves: | ||
| 3-spool control valve for Power Angle Tilt dozer | ||
| Positions: | ||
| Blade lift | Raise, hold, lower, and float | |
| Blade tilt | Right, hold, and left | |
| Blade angle | Right, hold, and left | |
| Additional control valve required for ripper | ||
| Positions: | ||
| Ripper lift | Raise, hold and lower |
KOMATSU
Name : KOMATSU
Service Tel : (8621)-6841-4567
E-mail :
Web Site : https://home.komatsu/en/
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
