Construction Equipment Online > Motor Grader > CatMotor Grader > Cat M Series Motor Graders 140M (Environment Canada Tier 3)
Cat M Series Motor Graders 140M (Environment Canada Tier 3)

Cat M Series Motor Graders 140M (Environment Canada Tier 3)

Rated power 136.0 kW
Max.torque 1159.0 N·m
Send Inquiry

Engine

           

The Cat C7 ACERT engine gives you the performance you need to maintain consistent grading speeds for maximum productivity. Superior torque and lugging capability provide the power to pull through sudden, short-term increases in loads. ACERT Technology lowers combustion chamber temperatures and optimizes fuel combustion to generate more work output for your fuel cost. ACERT engines also generate fewer emissions to meet the needs of equipment owners around the world.

Hydraulic Demand Fan

The hydraulic demand fan automatically adjusts speed according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.

Engine Idle Shutdown Timer

This standard feature can be software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.



Work Tools and Attachments

           

Moldboard Options

The 140M motor grader comes equipped with a 3.7 m (12 ft) moldboard. An optional 4.3 m (14 ft) blade is also available. Left side extensions can be added for greater versatility.

Snow Removal Work Tools

Multiple snow plow, snow wing and mounting options increase machine versatility and utilization throughout the year.

Ground Engaging Tools (GET)

A variety of tools are available from Cat Work Tools, including cutting edges, graderbits and end bits, all designed for maximum service life and productivity.

Front Mounted Groups

A front mounted push plate or front lift group are available. The front lift group can be combined with a front dozer blade or front scarifier for added versatility.

Rear Ripper/Scarifier

Made to penetrate tough material fast and rip thoroughly for easier movement with the moldboard. The ripper includes three shanks (with holders for five). Nine scarifier shanks can also be added for additional versatility.



Sustainability

           

Fuel Efficiency

• Integrated machine systems and technologies improve productivity for greater accuracy, allowing the machine to do more work per gallon/liter of fuel.

Green House Gas Emissions

• Reduced fuel consumption means reduced CO2 emissions.

Material Efficiency and Lifecycle Costs


  • Replaceable wear parts save maintenance time and cost, and extend major component life.

  • Major components are built to be rebuilt, eliminating waste and saving customers money by giving the machine and/or major components a second - and even third-life.

  • Approximately 95% of machine materials can be recycled (ISO 16714) to conserve valuable natural resources and further enhance machine end-of-life value.


Sound

• Reduced engine noise and quieter cabs mean lower operator and spectator sound levels.

Safety


  • Ecology drains help make draining fluids more convenient and help prevent spills.

  • Cartridge style hydraulic fluid filters provide safe clean draining of filters prior to replacement, helping to prevent fluid spills.

  • A variety of safety features help safeguard operators and others on the job site.




Structures and Drawbar-Circle-Moldboard

           

Caterpillar designs motor grader frame and drawbar components to give you performance and durability. The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down. The articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation for safety during service or transport.

Easy Maintenance for More Uptime

The M Series drawbar, circle and moldboard are designed to make it easy for you to keep the components tight. Shims and patented top-adjust wear strips are easy to add or replace, dramatically reducing downtime. Durable nylon composite wear inserts maximize circle torque and component life. Sacrificial brass wear strips between the blade mounting group and moldboard can be easily adjusted and replaced. Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

Blade Angle and Moldboard

An aggressive blade angle, optimized moldboard curvature and large throat clearance help you work more efficiently by allowing material to roll more freely along the blade. Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts to give you greater moldboard reliability and long service life. The link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.



Steering and Implement Controls

           

Operators are more comfortable and productive with two electro-hydraulic joysticks. New and experienced operators around the world report that the controls are easy to learn, and that the new electronically adjustable control pods make it easier to position them for optimal comfort, visibility and proper operation.

Joystick Functions

The left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float. The right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock. Joystick lean angle mirrors the steer tires' turning angle. A brake tensioning system holds the joystick in position until the operator moves it. The steering control automatically reduces steering sensitivity at higher ground speeds for predictable control. Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped).

Electronic Throttle Control

Electronic Throttle Control helps improve productivity by providing the best match of horsepower and torque for the demands of the application.

Articulation Return-to-Center

Automatically returns the machine to a straight frame position from any angle with the touch of a button.



Smart Machine Systems

           


  • Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.

  • Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.

  • Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.

  • Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.




Serviceability and Customer Support

           

Cat motor graders are designed to help you increase uptime and reduce costs. Grouped service points and extended service intervals save maintenance time. A standard Automatic Lubrication System maintains proper grease on working surfaces, increasing component life and purging contaminants from pins and bushings to help prevent damage. Standard Fast-Fill allows customers to refuel in less than four minutes so you can get back on the job quickly.

Unparalleled Dealer Support

When it comes to supporting you, Cat dealers are second to none. From machine selection and purchase to maintenance support and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running.



Safety

           

Operator Not Present Monitoring System

System keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.

Speed Sensitive Steering

Steering becomes less sensitive as ground speed increases for greater operator confidence and control.

Secondary Steering System

An electric hydraulic pump automatically engages in case of a drop in steering pressure so the operator can steer the machine to a stop.

Hydraulic Lockout

Hydraulic lockout disables all implement functions while still providing machine steering control. This is especially useful while roading.

Brake Systems

Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.

Walkways and Grab Rails

Perforated steel tandem walkways and convenient grab rails give you a sturdy platform when moving on, off and around the machine.

Circle Drive Slip Clutch

Circle Drive Slip Clutch protects the drawbar, circle and moldboard from shock loads if the blade encounters an immovable object and also reduces the possibility of abrupt directional changes in poor traction conditions.

Blade Lift Accumulators

Blade Lift Accumulators help absorb impact loads by allowing vertical blade travel. This optional feature helps reduce wear and also helps reduce impact loading for enhanced operator safety.

M Series Safety Features


  • Rearview camera with in-cab monitor

  • Grouped, ground level service points

  • Laminated front window glass

  • Optional LED Lighting

  • Ground-level electrical disconnect switch

  • Ground-level engine shutoff switch

  • Anti-glare paint eases night operation

  • Front and rear fenders




Power Train

           

We designed the M Series Motor Graders to give you efficiency and longevity in your most demanding applications.

  • Standard Automatic Differential Lock/Unlock unlocks the differential during a turn and re-locks when straight for easier operation and to help protect the power train.

  • Full Electronic Clutch Pressure Control system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.

  • Programmable Autoshift option simplifies operation by allowing the operator to program the transmission to shift at optimal points to match your application.

  • Power Shift Countershaft Transmission is matched to the Cat engine to maximize power to the ground.

  • Wide operating gear range for maximum productivity.

  • Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.


Front and Rear Axles

The sealed spindle keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life. A bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.

Hydraulic Brakes

Oil-bathed multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to give you dependable stopping power and longer life.



Operator Station

           

Visibility

Good visibility is key to your safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. An optional rear vision camera further enhances lines of sight all around the machine.

Comfort and Control

Experience the most spacious, comfortable cab in the industry. Joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue for better productivity. Rocker and control switches are in easy reach. A standard Cat Comfort Series suspension seat is fully adjustable. Control pods can be adjusted electronically so it is even easier to set up for an ideal operating position. Multiple isolation mounts significantly reduce sound and vibration for a more relaxed work environment. The high capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear. An optional deluxe AM/FM radio with CD, MP3 and Bluetooth technology enables streaming audio from a portable device and hands-free use of a mobile phone when safe to do so.

In-Dash Instrument Cluster

Easy-to-read, high-visibility gauges and warning lamps keep you aware of critical system information. Cat Messenger offers real-time machine performance and diagnostic data to help you get the most from your machine.



Integrated Technologies

           

Cat Grade Control

Cat Grade Control Cross Slope is an optional fully integrated, factory installed system that helps your operator more easily maintain desired cross slope by automatically controlling one side of the blade. The system is job-ready from day one, and scalable for the future with AccuGrade™ upgrade kits that provide additional 2D and/or 3D control.

AccuGrade Attachment Ready Option

An AccuGrade Attachment Ready Option can be ordered as a factory- or dealer-installed option. It includes built-in mounting points and internal wiring, to make installation of the AccuGrade grade control system faster and easier.

Cat AccuGrade

AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help your operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and achieve greater accuracy, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, helping to make the work site safer and more cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).

Cat Product Link™

Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for one machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface. Knowing where your equipment is, what it's doing and how it's performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity and lower operating costs.* *Product Link licensing not available in all areas. Please consult your Cat dealer for availability.



Hydraulics

           

Responsive Hydraulics

A proven load-sensing system and advanced electro-hydraulics give you superior implement control and responsive hydraulic performance that helps make your operator's job easier. Continuously matching hydraulic flow/pressure to power demands creates less heat and reduces power consumption.

  • Consistent, Predictable Movement - Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.

  • Balanced Flow - Hydraulic flow is proportioned to give you confidence that all implements will operate simultaneously without slowing the engine or speed of some implements.


Blade Float

Allows the blade to move freely under its own weight. By floating both cylinders, the blade can follow the contours of the ground. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.

Independent Oil Supply

Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, which reduces heat build-up and extends component life. Cat XT™ hose allows high pressures for maximum power and reduced downtime.




Overview

The M Series Motor Grader has become the industry standard in operational efficiency and overall productivity. From building roads to maintaining them, M Series Motor Graders are designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.

Engine

Units:

Base Power (1st Gear) - Net183.0 HP | 136.0 kW
Engine ModelCat® C7 ACERT™ | Cat® C7 ACERT™
Bore4.3 in | 110.0 mm
Stroke5.0 in | 127.0 mm
Speed at Rated Power2,000 rpm | 2,000 rpm
EmissionsEngine is Certified for Environment Canada Tier 3 Standards | Engine is Certified for Environment Canada Tier 3 Standards
Maximum Torque - VHP Plus855.0 lb/ft | 1159.0 N·m
Torque Rise - VHP Plus39% | 39%
VHP Plus Range - Net136-174 kW (183-233 hp) | 136-174 kW (183-233 hp)
Displacement439.0 in³ | 7.2 l
Number of Cylinders6 | 6
Derating Altitude10000.0 ft | 3048.0 m
Standard - Fan Speed - Maximum1,450 rpm | 1,450 rpm
Standard - Fan Speed - Minimum600 rpm | 600 rpm
Standard - Ambient Capability109.0 °F | 43.0 °C
High Ambient - Fan Speed - Maximum1,650 rpm | 1,650 rpm
High Ambient - Fan Speed - Minimum600 rpm | 600 rpm
High - Ambient Capability122.0 °F | 50.0 °C

Power Train

Forward/Reverse Gears8 Forward/6 Reverse | 8 Forward/6 Reverse
TransmissionDirect drive, power shift, countershaft | Direct drive, power shift, countershaft
Brakes - ServiceMultiple oil disc | Multiple oil disc
Brakes - Service - Surface Area3565.0 in² | 23000.0 cm²
Brakes - ParkingMultiple oil disc | Multiple oil disc
Brakes - SecondaryDual circuit control system | Dual circuit control system

Hydraulic System

Circuit TypeElectro-hydraulic load sensing, closed center | Electro-hydraulic load sensing, closed center
Pump TypeVariable piston | Variable piston
Pump Output55.7 gal/min | 210.0 l/min
Maximum System Pressure3500.0 psi | 24150.0 kPa
Standby Pressure450.0 psi | 3100.0 kPa

Operating Specifications

Top Speed - Forward29.0 mile/h | 46.6 km/h
Top Speed - Reverse22.9 mile/h | 36.8 km/h
Turning Radius - Outside Front Tires24.93 ft | 7.6 m
Steering Range - Left/Right47.5 degrees | 47.5 degrees
Articulation Angle - Left/Right20 degrees | 20 degrees
Forward - 1st2.5 mile/h | 4.0 km/h
Forward - 2nd3.4 mile/h | 5.5 km/h
Forward - 3rd5.0 mile/h | 8.0 km/h
Forward - 4th6.8 mile/h | 11.0 km/h
Forward - 5th10.6 mile/h | 17.1 km/h
Forward - 6th14.5 mile/h | 23.3 km/h
Forward - 7th19.9 mile/h | 32.0 km/h
Forward - 8th29.0 mile/h | 46.6 km/h
Reverse - 1st2.0 mile/h | 3.2 km/h
Reverse - 2nd3.7 mile/h | 6.0 km/h
Reverse - 3rd5.4 mile/h | 8.7 km/h
Reverse - 4th8.4 mile/h | 13.5 km/h
Reverse - 5th15.7 mile/h | 25.3 km/h
Reverse - 6th22.9 mile/h | 36.8 km/h

Service Refill

Fuel Capacity110.0 gal (US) | 416.0 l
Cooling System10.6 gal (US) | 40.0 l
Hydraulic System - Tank16.9 gal (US) | 64.0 l
Transmission - Differential - Final Drives16.9 gal (US) | 64.0 l
Engine Oil6.6 gal (US) | 25.0 l
Tandem Housing - Each16.9 gal (US) | 64.0 l
Front Wheel Spindle Bearing Housing0.13 gal (US) | 0.5 l
Circle Drive Housing1.8 gal (US) | 7.0 l

Frame

Drawbar - Width3.0 in | 76.2 mm
Circle - Diameter60.2 in | 1530.0 mm
Circle - Blade Beam Thickness1.6 in | 40.0 mm
Drawbar - Height6.0 in | 152.0 mm
Circle - Height5.4 in | 138.0 mm
Front Frame Structure - Height12.0 in | 305.0 mm
Front Frame Structure - Thickness0.6 in | 16.0 mm
Front Frame Structure - Width12.0 in | 305.0 mm
Front Axle - Height to Center23.0 in | 571.0 mm
Front Axle - Wheel Lean - Left/Right18 degrees | 18 degrees
Front Axle - Total Oscillation per Side32 degrees | 32 degrees

Tandems

Height19.9 in | 506.0 mm
Width7.9 in | 201.0 mm
Sidewall Thickness - Inner0.6 in | 16.0 mm
Sidewall Thickness - Outer0.7 in | 18.0 mm
Drive Chain Pitch2.0 in | 50.8 mm
Wheel Axle Spacing60.0 in | 1523.0 mm
Tandem Oscillation - Front Up15 degrees | 15 degrees
Tandem Oscillation - Front Down25 degrees | 25 degrees

Moldboard

Blade Width12.0 ft | 3.7 m
Moldboard - Height24.0 in | 610.0 mm
Moldboard - Thickness0.87 in | 22.0 mm
Arc Radius16.3 in | 413.0 mm
Throat Clearance6.5 in | 166.0 mm
Cutting Edge Width6.0 in | 152.0 mm
Cutting Edge Thickness0.6 in | 16.0 mm
End Bit - Width6.0 in | 152.0 mm
End Bit - Thickness0.6 in | 16.0 mm
Blade Pull - Base GVW24294.0 lb | 11020.0 kg
Blade Pull - Maximum GVW31758.0 lb | 14405.0 kg
Down Pressure - Base GVW16410.0 lb | 7444.0 kg
Down Pressure - Maximum GVW28503.0 lb | 12929.0 kg
Moldboard - Width12.0 ft | 3.7 m

Blade Range

Circle Centershift - Right28.7 in | 728.0 mm
Circle Centershift - Left27.4 in | 695.0 mm
Moldboard Sideshift - Right26.0 in | 660.0 mm
Moldboard Sideshift - Left20.1 in | 510.0 mm
Maximum Blade Position Angle90 degrees | 90 degrees
Blade Tip Range - Forward40 degrees | 40 degrees
Blade Tip Range - Backward5 degrees | 5 degrees
Maximum Lift Above Ground18.9 in | 480.0 mm
Maximum Depth of Cut28.1 in | 715.0 mm
Maximum Shoulder Reach Outside of Tires - Left70.5 in | 1790.0 mm
Maximum Shoulder Reach Outside of Tires - Right77.9 in | 1978.0 mm

Ripper

Ripper Shank Holder Spacing21.0 in | 533.0 mm
Ripping Depth - Maximum16.8 in | 428.0 mm
Ripper Shank Holders5 | 5
Penetration Force20540.0 lb | 9317.0 kg
Pry-Out Force26259.0 lb | 11911.0 kg
Machine Length Increase, Beam Raised36.2 in | 919.0 mm

Scarifier

Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing4.6 in | 116.0 mm
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders5/11 | 5/11
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum18.4 in | 467.0 mm
Front, V-Type, 5 or 11 Tooth - Working Width47.4 in | 1205.0 mm
Mid, V-Type - Scarifier Shank Holder Spacing4.6 in | 116.0 mm
Mid, V-Type - Scarifier Shank Holders11 | 11
Mid, V-Type - Scarifying Depth, Maximum11.5 in | 292.0 mm
Mid, V-Type - Working Width46.6 in | 1184.0 mm
Rear - Scarifying Depth, Maximum10.5 in | 266.0 mm
Rear - Working Width91.0 in | 2300.0 mm
Rear - Scarifier Shank Holders9 | 9
Rear - Scarifier Shank Holder Spacing10.5 in | 267.0 mm

Weights

Operating Weight - Typically Equipped41868.0 lb | 18991.0 kg
Gross Vehicle Weight - Typically Equipped41868.0 lb | 18991.0 kg
Gross Vehicle Weight - Maximum - Rear Axle35287.0 lb | 16006.0 kg
Gross Vehicle Weight - Base - Front Axle9561.0 lb | 4337.0 kg
Gross Vehicle Weight - Base - Rear Axle26993.0 lb | 12244.0 kg
Gross Vehicle Weight - Maximum - Total51892.0 lb | 23538.0 kg
Gross Vehicle Weight - Base - Total36554.0 lb | 16581.0 kg
Gross Vehicle Weight - Maximum - Front Axle16606.0 lb | 7532.0 kg
Gross Vehicle Weight - Typically Equipped - Front Axle11716.0 lb | 5314.0 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle30152.0 lb | 13677.0 kg
Gross Vehicle Weight - Typically Equipped - Total41868.0 lb | 18991.0 kg

Dimensions

Height - Top of Cab Product Link133.0 in | 3378.0 mm
Length - Push Plate to Ripper399.1 in | 10136.0 mm
Length - Push Plate to Ripper Retracted386.5 in | 9818.0 mm
Height - Top of Cab130.2 in | 3308.0 mm
Width - Outside Front Tires98.9 in | 2511.0 mm
Length - Front Axle to Mid Tandem241.1 in | 6123.0 mm
Length - Front Tire to Rear of Machine344.6 in | 8754.0 mm
Length - Front Axle to Moldboard100.5 in | 2552.0 mm
Length - Between Tandem Axles60.0 in | 1523.0 mm
Width - Outside Rear Tires98.9 in | 2511.0 mm
Width - Tire Center Lines84.3 in | 2140.0 mm
Height - Front Axle Center23.5 in | 596.0 mm
Height - Exhaust Stack121.1 in | 3076.0 mm
Height - Top of Cylinders119.7 in | 3040.0 mm
Ground Clearance - Rear Axle13.3 in | 339.0 mm

Standards

BrakesISO 3450:1996 | ISO 3450:1996
ROPS/FOPSISO 3471:1994, ISO 3449:1992 | ISO 3471:1994, ISO 3449:1992
SoundISO 6394:2008, ISO 6395:2008 | ISO 6394:2008, ISO 6395:2008
SteeringISO 5010:2007 | ISO 5010:2007

Net Power - VHP Plus

Gear - Forward 1st183.0 HP | 136.0 kW
Gear - Forward 2nd188.0 HP | 140.0 kW
Gear - Forward 3rd203.0 HP | 151.0 kW
Gear - Forward 4th208.0 HP | 155.0 kW
Gear - Forward 5th213.0 HP | 159.0 kW
Gear - Forward 6th218.0 HP | 163.0 kW
Gear - Forward 7th233.0 HP | 174.0 kW
Gear - Forward 8th233.0 HP | 174.0 kW
Gear - Reverse 1st183.0 HP | 136.0 kW
Gear - Reverse 2nd188.0 HP | 140.0 kW
Gear - Reverse 3rd-6th203.0 HP | 151.0 kW

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China