| Rated rpm | 1900 rpm |
|---|---|
| Operating Weight | 87,100 lb 39500 kg |
9 mm 0.35" thick guarding protects the sides and rear of the fuel and hydraulic tank group from damage and debris.
Additional sealing is added to the engine doors and chassis components to reduce the amount of debris entering the engine compartment.
Strategically placed on the side, bottom and front of the main frame, deflector bars and bolt guards help redirect debris away from components.
Angled front striker bars are designed to prevent debris from riding up on the track sand damaging the chassis. The bolt-on design allows for easy servicing.
The 4115 kg 9,072 lb counterweight optimizes machine balance for landfill applications and has bolt-on rear striker bars. Removable plates allow adjustments to meet special applications. Rear striker bars are also available for machines equipped with rippers.
The turbine type pre-cleaner removes large particles and extends the cab air filter life.
The AC condenser is mounted to the roof to protect it from debris and to increase cooling efficiency.
The thermal guard covers the exhaust manifold, KDPF, and hot side of the turbocharger, reducing the potential for combustible debris to come in contact with hot surfaces.
A protective screen is added to the standard centrifugal engine air precleaner to remove large particles from the engine air before they reach the filter elements.
Seal guards around the final drive form a stepped labyrinth to provide 360° of protection to help prevent debris from entering oil seal areas and extend component life. The front idler seals are also protected by additional guarding.
Powered Engine Underguard
The electric winch located on the left side of the mainframe powers the hinged, smooth bottom underguard which provides easy access to the engine compartment for cleaning accumulated trash.
The two-piece radiator guard doors allow easy access to the standard wide core radiator for cleaning.Computer controlled forward and reverse fan intervals allow the operator to concentrate on productivity while keeping the radiator clean.
The hydraulic oil cooler is relocated to the rear to increase cooling efficiency. It features the Mesabi flexible core heat exchanger for easier cleaning and maintenance.
Optional trapezoid shaped track shoe holes allow debris to be pushed through and reduce track compacting.
The 2 hood mounted lights are relocated to the top of the cylinders along with 2additional lights to improve visibility over the trash rack.The cab is prewired for installation of a beacon light.
The see through vertical bars of the trash rack were designed to ensure good operator visibility. The trash rack and blade are both painted black to reduce glare.
The optional cab air filtration system provides pre-cleaned, filtered air to the HVAC system.The cab is pressurized to minimize odors and dust.
| Model | Komatsu SAA6D140E-6* | |
| Type | 4-cycle, water-cooled, direct injection | |
| Aspiration | Komatsu variable geometry turbocharged, air-to-air aftercooled, cooled EGR | |
| Number of cylinders | 6 | |
| Bore x stroke | 5.51" x 6.50" | 140 mm x 165 mm |
| Piston displacement | 930 in³ | 15.24 ltr |
| Governor | All-speed and mid-range, electronic | |
| Horsepower : | ||
| SAE J1995 - Gross | 360 HP | 268 kW |
| ISO 9249 / SAE J1349 - Net | 354 HP | 264 kW |
| Rated rpm | 1900 rpm | |
| Fan drive type | Hydraulic | |
| Lubrication system : | ||
| Method | Gear pump, force lubrication | |
| Filter | Full-flow | |
| *EPA Tier 4 Interim and EU stage 3B emissions certified |
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
| Travel speed: | ||
| 1st Gear forward | 2.4 mph | 3.8 km/h |
| 1st Gear reverse | 2.9 mph | 4.6 km/h |
| 2nd Gear forward | 3.5 mph | 5.6 km/h |
| 2nd Gear reverse | 4.2 mph | 6.8 km/h |
| 3rd L Gear forward | 4.7 mph | 7.5 km/h |
| 3rd L Gear reverse | 5.7 mph | 9.2 km/h |
| 3rd Gear forward | 7.2 mph | 11.6 km/h |
| 3rd Gear reverse | 8.7 mph | 14.0 km/h |
Double-reduction, spur and planetary final drives increase tractive effort. Segmented sprockets are bolt-on for easy inthe- field replacement.
Palm Command Control System (PCCS) lever controls for all
directional movements. Pushing the PCCS lever forward results
in forward machine travel, while pulling it rearward reverses the
machine. Simply tilt the PCCS lever to the left to make a left
turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering
planetary units and an independent hydraulic pump and motor.
Counter-rotation turns are also available. Wet, multiple-disc,
pedal-controlled service brakes are spring-actuated and
hydraulically released. Gearshift lock lever also applies parking
brakes.
| Minimum turning radius | 7'0" | 2.14 m |
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted on the track
frame with a bogie suspension system whose oscillating
motion is cushioned by rubber pads.
Track shoes
Lubricated tracks. Unique dust seals for preventing entry of
foreign abrasives into pin-to-bushing clearance for extended
service. Track tension easily adjusted with grease gun.
| Suspension | Oscillation-type with equalizer bar and forward mounted pivot shafts | |
| Track roller frame | Monocoque, high-tensilestrength steel construction | |
| Rollers and idlers | Lubricated | |
| Number of shoes (each side) | 42 | |
| Grouser height | 3.1" | 80 mm |
| Shoe width (standard/maximum) | 610 mm / 710 mm | 24" / 28" |
| Ground contact area | 6,193 in² | 39955 cm² |
| Ground pressure (tractor only) | 11.9 psi | 82.4 kPa / 0.84 kg/cm² |
| Number of track rollers (each side) | 7 | |
| Number of carrier rollers (each side) | 2 |
| Fuel tank | 165 U.S. gal | 625 ltr |
| Coolant | 27.3 U.S. gal | 103.5 ltr |
| Engine oil | 9.8 U.S. gal | 37 ltr |
| Damper | 0.4 U.S. gal | 1.5 ltr |
| Hydraulic oil | 24.2 U.S. gal | 91.5 ltr |
| Transmission, bevel gear, and steering system | 23.8 U.S. gal | 90 ltr |
| Final drive (each side) | 8.2 U.S. gal | 31 ltr |
Tractor weight
Including rated capacity of lubricant, coolant, full fuel tank,
operator and standard equipment.
Operating weight
Including strengthened SIGMADOZER®, giant ripper,
ROPS cab, operator, standard equipment, rated capacity of
lubricant, coolant, and full fuel tank.
| Tractor weight | 68,350 lb | 31000 kg |
| Operating weight | 87,100 lb | 39500 kg |
| Ground pressure | 15.4 psi | 106 kPa / 1.08 kg/cm² |
Closed-center load sensing system (CLSS) designed for precise
and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted beside the hydraulic
tank. Variable piston pump with capacity (discharge flow) of
325 ltr/min 85.9 U.S. gal/min for steering and 180 ltr/min
47.6 U.S. gal/min for implemented at rated engine rpm.
Relief valve setting
. . . for implement 27.5 MPa 280 kg/cm² 3,980 psi
. . . for steering 38.2 MPa 390 kg/cm² 5,550 psi
| Control valves: | ||
| Spool control valve for SIGMADOZER®, Semi-U tilt dozer and Full-U | ||
| Positions: | Blade lift | Raise, hold, lower, and float |
| Blade tilt | Right, hold, and left | |
| Additional control valve required for variable digging angle multi-shank ripper and giant ripper. | ||
| Positions: | Ripper lift | Raise, hold, and lower |
| Ripper tilt | Increase, hold, and decrease | |
| Hydraulic cylinders | Double-acting, piston | |
| Number of cylinders | Bore | Bore |
| Blade Lift / 2 | 4.33" | 110 mm |
| Blade Tilt (Dual tilt) / 2 | 6.30" | 160 mm |
| Blade Tilt (Single Tilt) / 1 | 6.30" | 160 mm |
| Ripper Lift | 7.09" | 180 mm |
| Ripper Tilt / 1 | 7.87" | 200 mm |
| Hydraulic oil capacity (refill): | ||
| SIGMADOZER | 22.5 U.S. gal | 85 ltr |
| Semi-U dozer | 22.5 U.S. gal | 85 ltr |
| Full-U dozer | 22.5 U.S. gal | 85 ltr |
| Ripper equipment (additional volume): | ||
| Multi-shank ripper | 9.8 U.S. gal | 37 ltr |
| Giant ripper | 9.8 U.S. gal | 37 ltr |
KOMATSU
Name : KOMATSU
Service Tel : (8621)-6841-4567
E-mail :
Web Site : https://home.komatsu/en/
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
