| Max. Pile Diameter | |
|---|---|
| Max. Pile Depth | 60m |
| Max. Output Torque | 180(kN.m) |
It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability;
It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost;
Cummins electric control turbo-supercharged engin e is used. It complies with Euro III emission standard ,In addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard;
Using full electronic control technology of CAN bus, Improves the reliability of the whole vehicle and simplify hydraulic line, Fully reflects the people, machine, electricity and liquid integration;
Winch-crowd and sleeve-driven functions are available for selection to CFA, hydraulic casing oscillator, DTH hammer satisfy various needs of the users;
It is equipped with a centralized lubrication system as standard configuration; maintenance is easier;
The machine obtains CE certfication of TüV Rheinland group.
| Project | Unit | Parameter |
|---|---|---|
| Max.Drilling Diameter | ||
| Uncased | (mm) | φ1800 |
| Cased | (mm) | φ1500 |
| Max.Drilling Depth | (m) | 60 |
| Dimension | ||
| Working condition L × W × H | (mm) | 8350×4200×20480 |
| Transportation condition L × W × H | (mm) | 14255×2960×3450 |
| Overall Drilling Weight | (t) | 56 |
| Engine | ||
| Model | - | CUMMINS QSB6.7-C260 |
| Rated Power | (kW) | 194/2200 |
| Hydraulic System | ||
| Working pressure | (MPa) | 35 |
| Rotary Drive | ||
| Max. output torque | (kN.m) | 180 |
| Rotary speed | (r/min) | 7~27 |
| Spin off speed | (r/min) | 102 |
| Pull-Down Cylinder | ||
| Max.pull-down piston push | (kN) | 160 |
| Max.pull-down piston pull | (kN) | 180 |
| Max.pull-down piston stroke | (mm) | 5000 |
| Crowd Winch | ||
| Max.pull-down piston push | (kN) | - |
| Max.pull-down piston pull | (kN) | - |
| Max. pull-down piston stroke | (mm) | - |
| Main Winch | ||
| Max.pulling force | (kN) | 180 |
| Max. single-rope speed | (m/min) | 65 |
| Diameter of the steel wire rope | (mm) | 28 |
| Auxiliary Winch | ||
| Max. Pulling force | (kN) | 50 |
| Max. single-rope speed | (m/min) | 70 |
| Diameter of the steel wire rope | (mm) | 16 |
| Drilling mast | ||
| Left/right inclination of mast | (°) | 42432 |
| Front inclination of mast | (°) | 5 |
| Rotary table slewing angle | (°) | 360 |
| Traveling | ||
| Max. traveling speed | (km/h) | 2.3 |
| Max.grade ability | (%) | 35 |
| Crawler | ||
| Track shoe width | (mm) | 700 |
| Distance between tracks | (mm) | 2960~4200 |
| The length of crawler | (mm) | 5140 |
| Average ground pressure | (kPa) | 93.6 |
Xuzhou Construction Machinery Group Co., Ltd.
Name : XCMG
Service Tel : 86-516-87739271
E-mail : export@xcmg.com
Web Site : http://www.xcmg.com/en-us/
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
