Sany SSR200C-6 road roller useing water wheel type lubrication on the vibratory bearing extends the bearing life up to 5,000 hours. The hydraulic system of the 200hp road roller contains three stage filtration.

Extended Service Life

The use of water wheel type lubrication on the vibratory bearing extends the bearing life up to 5,000 hours.

The engine air filter is raised and the air is filtered twice to protect the engine.

The hydraulic system contains three stage filtration.

Higher Compaction Efficiency

10% greater excitation force than other products in the same category resulting in 16.7% greater production.

Safety First Design

Rounded bumpers front and rear

Large rear glass and sloped hood for greater visibility

Comfortable Operation

Cab mounted on vibration damping mounts

Cab climate control

Operator control forces have been reduced

Operating weight	20000kg
Weight at drum	13600kg
Weight at rear axle	6400kg
Drum static linear load	638N/cm
Vibration frequency	29/35Hz
Nominal amplitude	1.9/0.95mm
Excitation force	380/275kN
Drum diameter	1600mm
Drum width	2130mm
Drum edge thickness	40mm
Travel speed - high	0-6/0-8
Travel speed- low	0-4.5/0-5.5
Theoretical gradeability	45/50
Ground clearance	410mm
Wheelbase	3185mm
Steering angle	±35°
Swing angle	±12°
Min. turning outside diameter	12350mm
Tires	23.1-26-8PR
Model	SANY D07S3T3
Emissions	Tier III
Rated power	180kW
Battery	24x100 VxAh
Fuel tank	300L
Hydraulic oil tank	150L