| Operating Weight | 10410.0 kg |
|---|---|
| Travel speed | 12.0 km/h |
Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.
Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.
Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.
Machine to Machine Communication improves worksite efficiency by allowing operators to monitor fleet patterns. The system allows operators to monitor rolling patterns of other machine and pickup where they left off. It also simplifies night-time operation when lighting conditions make it difficult to see after the first pass.
AAC optimizes compaction effort based on the response received from the asphalt and sub-base layers. Each drum is equipped with a dedicated accelerometer and ECM that delivers quick calculations to help determine the ideal amplitude to maximize compaction performance. The system has a fast, 4 second response time from the minimum to maximum amplitude that helps ensure even compaction.
The two amplitude and two frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.
The vibratory systems offer multiple options that help fine-tune performance on thick challenging lifts. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.
The C4.4 engine provides 98 kW (131 hp) of power and meets emissions equivalent to U.S. EPA Tier 4 Interim and EU Stage IIIB emission requirements. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service.
The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. The high capacity fan directs warm air away from the operator for a more comfortable operating environment.
The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle, wide-width seat belt, cup holders and a lockable storage compartment.
The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.
The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in the same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.
The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.
The Cat® CB10 Split Drum is a 10 ton roller with 1700 mm (67") tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other granular materials. It features exceptional visibility and control, smooth operating powertrain, and versatile vibratory systems including Auto-Adjustable Compaction and 2-Amplitude, 2 frequency.
Units:
| Operating Weight | 22950.0 lb | 10410.0 kg |
| Maximum Operating Weight with Cab | 26610.0 lb | 12070.0 kg |
| Maximum Operating Weight with ROPS | 25995.0 lb | 11970.0 kg |
| Standard Operating Weight with Cab | 23525.0 lb | 10670.0 kg |
| Standard Operating Weight with ROPS | 22950.0 lb | 10410.0 kg |
| Standard Compaction Width | 67.0 in | 1700.0 mm |
| Maximum Compaction Width | 73.0 in | 1940.0 mm |
| Static Linear Load | 176.0 lb/in | 31.5 kg/cm |
| Travel Speed - Maximum | 7.5 mile/h | 12.0 km/h |
| Gross Power | 131.0 HP | 98.0 kW |
| Engine Model | Cat C4.4 with ACERT Technology | Cat C4.4 with ACERT Technology |
| Overall Length | 177.0 in | 4565.0 mm |
| Wheel Base | 130.0 in | 3300.0 mm |
| Height - With ROPS/FOPS | 117.0 in | 2982.0 mm |
| Overall Width | 73.0 in | 1872.0 mm |
| Drum Diameter | 47.0 in | 1198.0 mm |
| Drum Width | 67.0 in | 1700.0 mm |
| Vibration Selection | Independent per drum, front only, rear only, both | Independent per drum, front only, rear only, both |
| Centrifugal Force per Drum - Maximum | 19491.0 lb | 86.7 kN |
| Centrifugal Force per Drum - Minimum | 16973.0 lb | 75.5 kN |
| Nominal Amplitude - High | 0.024 in | 0.61 mm |
| Nominal Amplitude - Low | 0.013 in | 0.33 mm |
| Fuel Tank Capacity | 55.0 gal (US) | 208.0 l |
| Water Spray Tank Capacity | 221.0 gal (US) | 837.0 l |
CATERPILLAR
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
