Sany STG160C-6 motor grader is featured by the hydraulic drive, stepless speed change, and simplified operation. The 160hp motor grader with German Bosch fuel injection leads to low exhaust emissions.

The reliable, ZF "Tiptronic" transmission contributes to operator comfort.

Reliable and durable Meritor rear axles feature imported bearings and extra rigid drive chain.

The high torque, overload protected circle drive motor and gearbox allow precise positioning of the moldboard and blade.

High precision circle bearing is maintenance free.

Ground level refueling point and centralized electrical component locations are among the operator and service friendly features.

Supplier	Dongfeng Cummins
Emission standard	Euro Ⅲ
Model	QSB4.5-C160
Rated power	119 kW
Rated rotation speed	2200 rpm
Peak torque	624 Nm
Typical: L*W*H	8650×2620×3260 mm
Standard (with front counterweight): L*W*H	9000×2620×3260 mm
With front counterweight and rear scarifier: L*W*H	10050×2620×3260 mm
With front bulldozing plate and rear scarifier: L*W*H	10900×2620×3260 mm
Front and rear axle base	6300 mm
Middle and rear wheel base	1538 mm
Clearance from rear axle to ground	400 mm
Weight of typical type	14200 Kg
Standard (with front counterweight)	15000 Kg
With front counterweight and rear scarifier	16220 Kg
With front bulldozing plate	15150 Kg
Max. total weight (with front bulldozing plate and rear scarifier)	16250 Kg
Max.traction	89 KN
Length of blade	3660（12ft）mm standard configuration
Height of blade	620 mm
Tilt angle	±90°
Turning angle	360 °
Gears	6 forward and 3 reverse
Forward speed	5/9/11/18/26/41 km/h
Reverse speed	5/11/26 km/h
Steering angle of front wheel	±50°
Tilt angle of front wheel	±17°
Articulated steering angle	±24°
Oscillation angle of front axle	±16°
Min. turning radius	7.3 m
Model of tire	17.5-25（12PR) standard configuration
Max. capacity of hydraulic oil tank	140 L
Max. capacity of fuel tank	350 L