Cat Mini Excavators 301.7D CR

Cat Mini Excavators 301.7D CR

Overall Weight 1690.0 kg
Send Inquiry

Compact Radius

           

The zero tail swing Cat 301.7D CR can work comfortably in confined work areas with the machine upper frame able to slew within its track width. This compact radius design also allows you to concentrate on the work being performed without having to worry about damage to the back of the machine or site.

Extending Undercarriage

Fitted with an extending undercarriage and fold out dozer blade as standard, the machine can gain access into most areas when fully retracted to 990 mm (3 ft 3 in), and once extended to its full 1300 mm (4 ft 3 in) working width the undercarriage affords excellent stability for even greater digging and loading performance.



Versatility

           

Hammer Lines as Standard

Hammer and two-way auxiliary hydraulic lines with quick disconnects allow the operation of a hydraulic hammer and of a bi-directional tool such as an auger. The optional second hydraulic function is operated by a proportional roller on the left-hand joystick. This option includes a switch that allows the operator to vary the auxiliary hydraulic flow to suit each individual work tool.

The ‘ready to work' quick disconnect connections are equipped with an accumulator as standard to help make releasing and changing of tools a quick and easy task. Located close to the work tool, they reduce hose lengths and minimize potential damage.

Additional Counterweight

An optional additional weight increases the machines lifting capability with only a small addition to the overhang. This is an ideal option when heavy hydra mechanical tools are being used.

Dig Depth/Reach

The choice of two stick lengths allows you to configure your machine to deliver either high stick force or greater reach. Dig depths are set to give good trenching for utility pipe work and cables.

Sturdy hoisting points on the canopy roof enable the easy, safe and rapid relocation of the machine between sites or for loading of the machine onto a trailer.

A range of work tools is available including buckets, hammer and auger to take advantage of the machines versatility. All these tools are matched to optimize machine performance and deliver excellent value through productivity and long life.



Operator Station

           

Controls


  • Ergonomically laid out operator station with pilot operated joystick and foot pedal. All functions are pilot controlled to deliver excellent control and eliminate the need for maintenance of cables and linkages.

  • The adjustable suspension seat provides a comfortable operating position and lifts to provide additional engine access.

  • Retractable seat belts ensure that they are kept in good condition and ready to wear for your safety and comfort.

  • Safety Lock Out - All machine controls are disabled by raising the control pod for safe and controlled machine starting.

  • The optional rear weather panel gives protection from wind and rain on the operator's back while working.


A roof panel allows the operator to see the bucket at height giving better and safer loading operations with less operator effort.

Adjustable wrist rests reduce fatigue by positioning to best suit your preferred operating position.

Travel foot bars are provided as standard to make moving around site easy and effortless. Ideal for traveling over longer distances or when you wish to operate the front linkage at the same time.



Engine and Service Access

           

Powerful Engine and Load Sensing Hydraulics

The 17.7 kW (24 hp) engine is matched with a load sensing hydraulic system and variable displacement pump to provide excellent digging performance and smooth control. No stall under load and power when needed make the 301.7D CR very productive for such a compact package.

Excellent Service Access

Daily checks and regular service points including fuel and hydraulic oil fill are easily reached via the large steel rear door and removable side panels. The main hydraulic valve and lines are also easily reached through a removable floor plate and side panels. The machine has durable steel body panels all around, offering good resistance to impact damage and helping to maintain the machine's appearance and value.

Customer Support - Unmatched Support Makes the Difference

Your Cat dealer is ready to assist you with your purchase decision and everything after.

  • Financing packages are flexible to meet your needs.

  • Unmatched parts availability keeps you working.

  • Make comparisons of machines, with estimates of component life, preventative maintenance and cost of production.

  • For more information on Cat products, dealers services and industry solutions, visit www.cat.com.





Overview

The new Cat® 301.7D CR gives you a blend of power, control and stability to make your working day easier and more productive.

Engine

Units:

Engine ModelYanmar 3TNV76 | Yanmar 3TNV76
Net Power17.7 HP | 13.2 kW
Displacement40.0 in³ | 1116.0 cm³
Gross Power - ISO 1439624.3 HP | 17.9 kW
Rated Net Power - 2,200 rpm - ISO 924917.7 HP | 13.2 kW

Weights

Operating Weight3726.0 lb | 1690.0 kg
Operating Weight - With Canopy3726.0 lb | 1690.0 kg
Transport Weight - With Canopy3550.0 lb | 1610.0 kg

Travel System

Gradeability30°/58% | 30°/58%
Travel Speed2.8 km/h-5.6 km/h (1.74 mph-3.48 mph) | 2.8 km/h-5.6 km/h (1.74 mph-3.48 mph)

Hydraulic System

Operating Pressure - Equipment3481.0 psi | 240.0 bar
Operating Pressure - Travel3481.0 psi | 240.0 bar
Operating Pressure - Swing2610.0 psi | 180.0 bar
Auxiliary Circuits - Primary and Secondary - Maximum Flow9.0 gal/min | 35.0 l/min
Auxiliary Circuits - Primary and Secondary - Maximum Pressure3335.0 psi | 230.0 bar
Maximum Bucket Force3190.0 lb | 14.2 kN
Maximum Stick Force - Long Stick1640.0 lb | 7.3 kN
Maximum Stick Force - Standard Stick1890.0 lb | 8.4 kN
Pump Flow at 2,200 rpm10.5 gal/min | 39.6 l/min

Blade

Height9.0 in | 230.0 mm
Dig Depth15.0 in | 390.0 mm
Lift Height11.0 in | 271.0 mm
Width990 mm/1300 mm (3 ft 3 in/4 ft 3 in) | 990 mm/1300 mm (3 ft 3 in/4 ft 3 in)

Service Refill Capacities

Fuel Tank Capacity5.0 gal (US) | 19.0 l
Hydraulic Tank Capacity5.3 gal (US) | 20.0 l

Dimensions (Approximate) - Standard Stick

Boom Swing Angle - LH65° | 65°
Boom Swing Angle - RH57° | 57°
Height7.75 ft | 2362.0 mm
Length - Undercarriage - Extending5.27 ft | 1607.0 mm
Maximum Boom Offset - LH1.37 ft | 418.0 mm
Maximum Boom Offset - RH1.75 ft | 533.0 mm
Maximum Dig Height11.27 ft | 3434.0 mm
Maximum Digging Depth7.61 ft | 2321.0 mm
Maximum Dozer Dig Depth1.28 ft | 390.0 mm
Maximum Dozer Lift Height11.0 in | 271.0 mm
Maximum Dump Height8.0 ft | 2441.0 mm
Maximum Reach - Ground Level12.6 ft | 3842.0 mm
Maximum Vertical Dig Depth5.18 ft | 1578.0 mm
Tail Swing Radius660 mm/722 mm (2'1"/2'4") | 660 mm/722 mm (2'1"/2'4")
Transport Length - Arm Lowered11.76 ft | 3584.0 mm
Undercarriage Width - Extended4.27 ft | 1300.0 mm
Undercarriage Width - Retracted3.25 ft | 990.0 mm
Width2.4 ft | 730.0 mm

Dimensions (Approximate) - Long Stick

Boom Swing Angle - LH65° | 65°
Boom Swing Angle - RH57° | 57°
Height7.75 ft | 2362.0 mm
Length - Undercarriage - Extending5.27 ft | 1607.0 mm
Maximum Boom Offset - LH1.37 ft | 418.0 mm
Maximum Boom Offset - RH1.75 ft | 533.0 mm
Maximum Dig Height11.64 ft | 3548.0 mm
Maximum Digging Depth8.14 ft | 2481.0 mm
Maximum Dozer Dig Depth1.28 ft | 390.0 mm
Maximum Dozer Lift Height11.0 in | 271.0 mm
Maximum Dump Height8.38 ft | 2555.0 mm
Maximum Reach - Ground Level13.11 ft | 3995.0 mm
Maximum Vertical Dig Depth5.64 ft | 1718.0 mm
Tail Swing Radius660 mm/722 mm (2'1"/2'4") | 660 mm/722 mm (2'1"/2'4")
Transport Length - Arm Lowered11.76 ft | 3584.0 mm
Undercarriage Width - Extended4.27 ft | 1300.0 mm
Undercarriage Width - Retracted3.25 ft | 990.0 mm
Width2.4 ft | 730.0 mm

Operating Specifications

Counterweight110.0 lb | 50.0 kg
Stick Length - Long43.2 in | 1100.0 mm
Stick Length - Standard37.1 in | 940.0 mm

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China