Construction Equipment Online > High Speed Doubly-Fed Wtg > SANYHigh Speed Doubly-Fed Wtg > SANY SE8720 2.0MW High Speed Double-fed WTG High Speed Doubly-Fed Wtg
SANY SE8720 2.0MW High Speed Double-fed WTG  High Speed Doubly-Fed Wtg

SANY SE8720 2.0MW High Speed Double-fed WTG High Speed Doubly-Fed Wtg

Rated power 2.0MW
Rotor diameter 87m
Swept area 5903-10386㎡
Send Inquiry

Wind Power Solution Provider

Customized Products and Service

SANY custom designs the 2.0MW wind turbine generators to meet your business needs and provides you with the integrated solutions covering site selection, wind assessment, construction, equipment installation and operation of wind farms.

High Productivity

Optimal CP Operation Technology

The optimal CP operation technology greatly increases the turbine's speed regulating range, thus the turbine can run with optimal capacity before reaching the rated power. This significantly improves the power curve, power generation capacity and reduces the cut-in speed and rated wind speed.

Low Wind Speed Design

Applying to the condition when the annual average wind speed is lower than 5m/s; reducing cut-in wind speed; and increasing generating capability of low speed wind period

Hydraulic Yaw Technology

SANY patented real-time yaw can realize precise orientation, capture maximal wind power, and real-time cast loose, and avoid stranded cable.

Wide Adaptability

Good Grid Adaptability

By magnetizing the rotor side of the double-fed WTG, the stator side of the double-fed WTG can output the same voltage and current as the frequency and phase of power grid voltage and carrying out independent active and reactive decoupling control according to requirement.

Converter/Main Control System

By improving the control algorithm, WTG can automatically adjust the power and rotation speed relationship based on environmental changes (such as air density, temperature and humidity) to increase full-power rectification at a low wind speed and generation.

High Reliability

Low Voltage Ride through Capability

The low voltage ride through test and other certifications guarantee that the turbine can respond rapidly during the reduction of voltage, generate the dynamic reactive power to support the recovery of grid voltage, and the active power is recovered rapidly after clearing the fault.

Overload Avoidance Technology

Based on the load condition of each part of turbine, the operating state can be controlled to avoid operation at its component's limit thus to protect the turbine from damage.

Low Cost

Self-climbing Cranes

This innovative design can realize hoisting and installing of tower, cabin, wind wheel and other large components without using large crawler cranes, helping you save abundant construction time and cost.

Operation and Maintenance Service

SANY makes the "1-2-3-15" service commitment: reply in 1 quarter hour, arrive on site in 2 hours, problem solved in 3 days and serious faults solved in 15 days.


Blade model DU
Gearbox ratio 105.88-126.7
Gearbox rated power 2165 kW
Generator rated speed 1800 rpm
Wind class IEC IIIC
Rated power 2000 kW
Rotor diameter 87 m
Swept area 5903-10386 ㎡
Rated wind speed 9 m/s
Cut-in wind speed 3 m/s
Cut-out wind speed 22 m/s
Hub height 80/85/90 m
Rotor weight 62.5 t
Nacelle weight 70 t

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China