Cat Electric Rope Shovels 7495 HF with Rope Crowd

Cat Electric Rope Shovels 7495 HF with Rope Crowd

Overview

Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that's better.

Dimensions

Units:
Dipper Payload 120.0 t | 109.0 t
Dipper Capacity 30.6-62.7 m3 (40-82 yd3) | 30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) 120.0 t | 109.0 t
Note Dependent on application and material density | Dependent on application and material density

Weights

Ballast - Furnished By Customer 667150.0 lb | 302614.0 kg
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection | These weights will vary slightly depending upon dipper and optional equipment selection
Note (2) All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) treads | All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) treads
Working Weight - With Dipper and Standard Links 3155000.0 lb | 1431064.0 kg

Main Structures

Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads 41.67 in | 12.7 cm
Ground Bearing Pressure - Note Ground bearing pressure is dependent upon many factors | Ground bearing pressure is dependent upon many factors
Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads 57 m2 (247 kPa); 614 ft2 (36 psi) | 57 m2 (247 kPa); 614 ft2 (36 psi)
Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. | A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Planetary Propel Dual-motor independent drive | Dual-motor independent drive
Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. | Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Upper Works Overall Width - Including Standard Walkways 41.99 in | 12.8 cm

Lube System

Components (1) Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room | Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Type Automatic, single-line system for open gear lubricant and grease | Automatic, single-line system for open gear lubricant and grease
Components (2) External fast fill from lower level | External fast fill from lower level

Electrical

Drive IGBT Acutrol drive system | IGBT Acutrol drive system
Note Other voltage options available to suit customer requirements | Other voltage options available to suit customer requirements
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V | 6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - 60 Hz 7,200V, 13,800V | 7,200V, 13,800V
Power Requirements - Average Power Demand 934-1308 kW | 934-1308 kW
Power Requirements - Peak power 3737 kW | 3737 kW
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V | 3 phase, 50/60 Hz, 7,200V
System Voltage - Nominal 50/60 Hz, 7,200V | 50/60 Hz, 7,200V

Front End

Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd (1) Rope Crowd with crowd machinery located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. | Rope Crowd with crowd machinery located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Crowd (2) (Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. | (Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Rope Data - Boom Suspension - Diameter 3.25 in | 83.0 mm
Rope Data - Boom Suspension - No. 4 | 4
Rope Data - Crowd - Diameter 2.5 in | 64.0 mm
Rope Data - Crowd - No. 1 | 1
Rope Data - Dipper Trip - Diameter 0.75 in | 19.0 mm
Rope Data - Dipper Trip - No. 1 | 1
Rope Data - Hoist - Diameter 2.75 in | 70.0 mm
Rope Data - Hoist - No. 2 | 2
Rope Data - Note High impact ropes available as an option | High impact ropes available as an option
Rope Data - Retract - Diameter 2.5 in | 64.0 mm
Rope Data - Retract - No. 1 | 1

Dimensions - Working Ranges

Dipper Capacities 30.6-62.7 m3 (40-82 yd3) | 30.6-62.7 m3 (40-82 yd3)
Dipper Payload 120.0 ton (US) | 109.0 t
Maximum Dumping Height 29.53 ft | 9.0 m
Operating Weight 3155000.0 lb | 1431064.0 kg

Dimensions (Approximate) - Optimal Working Ranges*

Cutting Height - Maximum 55.0 ft | 16.8 m
Cutting Radius - Maximum 79.72 ft | 24.3 m
Dumping Height - With Clearance to Open Dipper Door 29.53 ft | 9.0 m
Note (1) Optimal working ranges based on loading a Cat 797F truck. | Optimal working ranges based on loading a Cat 797F truck.
Note (2) *All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) treads. | *All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) treads.
Radius of Level Floor 55.77 ft | 17.0 m
Revolving Frame Tail Swing Radius 30.51 ft | 9.3 m

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China