SH400.8 is our second product of material handling machine , and it suggests we have achieved a major breakthrough in the research and development of manufacturing technology like automation technology, intelligent technology, electromechanical integration of the latest technology.
SH400.8 material handling machine can work in more construction fields which provides new economic growth point in the transformation of corporate restructuring.
Advantages:
1. Imported cummins engine with strong power, low fuel consumption and convenientmaintenance.
2. Advanced electric system with overcurrent, overload, leakage protection function.
3. Imported hydraulic system with double negative flow control pump and double circuit power regulation which canallocate engine power reasonably and improve work efficiency.
4. Wider view elevated cab equipped with top protective and former protective guard;Multi-function dashboard is of easy operation and high safety; overload protection device can alarm automaticlly for all kinds of pressure, temperature, oil level alarm when beyond the setting load.
5. Whole movable arm straight, gooseneck bent arm and multiple grabs and enhanced working device; the computer FEA software was used to optimize the design of working deviceto realize reasonable high strength structure, large lifting capacity and wide scope of work, and the maximum working range can be up to 14 meters high, 12.8 meters far, maximum weight of 26 tons, about 20 seconds each work cycle.
6. Simple and quick auxiliary equipment replacement. You can select rotary motor headwith 360 °rotating function, especially better for the directional raw material.

MODEL	SH400.8
operating weight (T)	36.8--38.1
bucket capacity (m3)	2.5（Shell）
engine model	Cummins 6CTAA8.3
rating power (kw/r/min)	198/2000
volume of fuel tank (L)	595
travel speed (km/h)	4.6/2.6
swing speed (r/min)	7.4
climbing capacity (%)	35
Max. sling force (T)	15.8
ground pressure (Kpa)	79.7
Drawbar pulling force (Kn)	279
hydraulic pump model	K5V160DT
max. flow （L/min)	300*2+30
working pressure (Mpa)	37
volume of hydraulic oil tank (L)	310
A  overall length (mm)	11425
B  overall width (mm)	3190
C  overall height （to top of boom）(mm)	3100
D  overall height （to top of cab）(mm)	4335
E  counterweight ground clearance(mm)	1200
F  min. ground clearance (mm)	523
G  tail swing radius (mm)	3410
H  length of track on ground (mm)	4030
J  track length (mm)	4945
K  track gauge (mm)	2590
L  track width (mm)	3190
M  track shoe width (mm)	600
N  turntable width (mm)	3515
A1 length of track on ground (during transporation)(mm)	7375
bucket arm length(mm)	5000
boom length(mm)	7600
No. of boom cylinder-bore x stroke	￠150*￠105*1285
No. of arm cylinder-bore x stroke	￠120*￠85*1280