Safe Control System

Switch between the operation and installation modes is more convenient and reliable, and the crane's functions including electronic level gauge, off-line stop, emergency electric control, and monitoring ensure your safety; load moment limiter is free of calibration, which provides you with a safer operation and costs you less time.

Reliable Function Guarantee

Sufficient safety margin in structural design; the control system runs stably even in extreme cold/hot weather, high altitude and sandy regions; advanced hydraulic technology, lightning protection, waterproof/dustproof devices are adopted to ensure the whole machine's stability and reliability; the crane passed the verification test of the strength twice higher than that in the industry.

Excellent Operation

Maximum load regulation and electronic proportion controls ensure smooth micro-movement and stable operation. A real-time queried electronic load chart is provided, more conveniently and quickly;

Convenient Maintenance Access

It takes no more than 10min/person to adjust, no more than 30 min/person for daily maintenance and no more than 2h/person to repair the machine.

Powerful Lifting Capacity

Wide-track chassis is design to ensure excellent overall and operating stability within 360°slewing range, the max. lifting capacity of boom is 37tx4.5m, the length of fully extended boom is 42m and the rated single rope pull of main and auxiliary winch is 5.1t.

Efficient Operating Speed

Outmost layer line speed of main and auxiliary lifting winches is 120m/min; Cummins 6-cylinder engine with rated power of 154kW@2200rpm, maximum torque of 870Nm@1400rpm

Optimized Transportation

With telescopic crawler, the maximum transportation width of whole machine is 3.36m, overall weight is 59.5t and self-disassembly/assembly could be achieved and the max. Single transport weight is 37t (excluding jib and auxiliary winch).

Max rated lifting capacity	55t
Max lifting moment	187 t·m
Boom length	11.3-42m
Longest (boom+fixed jib)	42+13m
Boom luffing angle	-2°-80°
Fixed jib offset angle	0° 15° 30°
Rope speed of main/auxiliary winches	0-120 m/min
Single rope pull	5t
Rope diameter	Φ18mm
Full raise/lower time of boom	60/60 s
Full extend/retract time of boom	100/90 s
Travelling speed	0-2.0km/h
Slewing speed	0-2.1rpm
Gradeability	45%
Model	Cummins QSB5.9-C210
Rated power	154kW/2200rpm
Rated torque	870Nm/1400rpm
Emissions	Tier 3
Crane weight	59.5t
Counterweight	20t
Max transport weight of single part	37t（without jib and auxiliary winch）
Maxtransport dimensions	14000×3360×3250mm
Average ground pressure	0.09Mpa