Sany HZS120F8 Batching Plant makes the maximum productivity 120 cubic meter per hour. The 120 cubic meter batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

Rapid Assembly Design

Build and put into operation rapidly. Easy to maintain and move.

Break away from the traditional welded mode of most concrete batching plants and enjoy our modular design. It is quick and convenient to install, easy to maintain and move. The compact footprint and flexibility will meet the requirements of the more complex work sites.

Designed for rapid and convenient installation

New control room, designed to be rapidly relocated.

Modular design of the inclined belt makes it easy to assemble, disassemble and transport. The support uses the open “U” end face and truss structure, thus the belt is simple and quick to install or replace. The toughened rollers effectively solve problems of deviation and adjustment.

The access steps and walkway are made of galvanized grid plate.

The batching station utilizes a new structure with a feeding height that is 200mm lower than that of the C6. This increases the speed and efficiency of the loader, thus saving energy and fuel consumption.

The storage silos use a floor type structure. Installed on the ground and easily built on site using common hardware.

General components convenient maintenance

Mass produced parts allows interchangeability and convenient maintenance.

Flexible to disassemble & assemble convenient to move

The new F8 concrete batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

New era coating (Optional)

Excellent rust prevention lasting protection

Break free of the need to coat on site. Enjoy factory installed hot dipped galvanization anti-corrosion coating to achieve the highest degree of corrosion protection with a service life of 20 years.

Ultrahigh toughness comprehensive protection

The galvanized coating on the components is produced by hot-dipped process that forms a protective structure and effectively prevents damage during transportation and use. All components are completely coated, including crevices and sharp corners.

Quick construction save time and labor

Compared to traditional “coat after build” methods, galvanization at the factory ensures higher quality while saving both time and labor.

Lasting protection benefit for long term

Zinc galvanization anti-rust coating can maintain rust prevention for up to 20 years. The paint costs of up to 150,000 yuan can be saved over the life cycle of the plant.

Energy Efficient

To improve mixing efficiency, the discharge ports of the aggregate silo and powder hopper are arranged in the middle of the mixer.

Production tasks intelligently queue in such a way as to achieve continuous production, improving efficiency by 10%.

The self adapting control integrates environmental protection and leak reduction to increase the discharge rate by 25%.

Intelligent production process control reduces energy consumption by 10%.

To prevent binding associated with material buildup, SANY intelligent cleaning allows cleaning without the need for shutting down the machine periodically. This enhances output and reduces the maintenance workload.

Intelligent control

The fault diagnostic system displays diagnostic messages in real time and displays reminders for maintenance based on operating conditions.

The system can be remotely upgraded to ensure the latest functions are available.

Environmentally friendly

The enclosed feed design significantly reduces environmental impact.

Patented pressure relieving technology for the powder silo effectively collect dust and eliminate the need for roof access.

The optional waste water and waste materials system recycles there valuable materials.

Easy maintenance

The overhaul cover plates and suspension points of the mixer permit convenient maintenance access and component replacement.

The hopper cover plate design provides unprecedented convenience for liner examination and replacement.

The powder hopper has an patented overhaul cap that solves the problem of breather pipe blockage.

The mixer cover is designed with caking prevention features and is configured with multiple manholes for convenient cleaning. 

Theoretical productivity

120 m3/h

Mixer model

JS2000CK

Motor power

2×37 kW

Cycle period

60 s

Nominal capacity of mixer

2000 L

Max.aggregate size

Φ80 mm

Powder lot bin capacity

4×200 t

Aggregate silo capacity

4×17 m³

Category of aggregate

4 (optional)

Material discharging height

4 m (optional)

Installed capacity

210 kW

Accuracy of aggregate

±2% kg

Accuracy of cement

±1% kg

Accuracy of fly ash

±1% kg

Accuracy of water

±1% kg

Accuracy of addtive

±1% kg

Standard reference weight

93 kg

Charging mode

Inclined Belt Type

Electricity standard

380V/50Hz