| Rated rpm | 1900 rpm |
|---|---|
| Operating Weight | 61,950 lb 28100 kg |
The travel control console has adjustment fore and aft, and height.
For improved rear visibility during reverse operations, the operator can adjust seat 15° to the right.
Hydrostatic Steering System—Smooth, Powerful Turning
The Hydrostatic Steering System (HSS) is powered by an independent hydraulic pump with engine power transmitted to both tracks without power interruption on the inside track. When the machine turns, the outside track moves faster and the inside slower, for smooth, powerful turns. Counter-rotation is available for minimum turning radius providing excellent maneuverability. Shock-free steering reduces machine vibration and minimizes operator fatigue.
Fan speed is automatically controlled depending on coolant and hydraulic oil temperature. This saves fuel and provides great productivity with a quiet operating environment.
D85’s cab mounts use a newly designed cab damper which provides excellent shock and vibration absorption capacity with its long stroke. Cab damper mounts soften shocks and vibration while traveling over adverse conditions, which conventional mounting systems are unable to absorb. The cab damper spring isolates the cab from the machine body, suppressing vibration and providing a quiet, comfortable operating environment.
Power train components are sealed in a modular design that allows the components to be dismounted and mounted without oil spillage.
| Model | Komatsu SAA6D125E-5 | |
| Type | 4-cycle, water-cooled, direct injection | |
| Aspiration | Turbocharged, air-to-air aftercooled, cooled EGR | |
| No. of cylinders | 6 | |
| Bore x stroke | 4.92" x 5.9" | 125 mm x 150 mm |
| Piston displacement | 674 in³ | 11.04 ltr |
| Governor | All-speed, electronic | |
| Horsepower: | ||
| SAE J1995 / Gross | 266 HP | 199 kW |
| ISO 9249 / SAE J1349* / Net | 240HP | 179 kW |
| Hydraulic fan at maximum speed / Net | 240 HP | 179 kW |
| Rated rpm | 1900 rpm | |
| Fan drive type | Hydraulic | |
| Lubrication system: | ||
| Method | Gear pump, force lubrication | |
| Filter | Full-flow | |
| EPA Tier 3 and EU stage 3A emissions certified. |
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral switch helps prevent accidental starts.
| Travel speed: | Forward: | Reverse: |
| 1st | 2.1 mph 3.3 km/h | 2.7 mph 4.4 km/h |
| 2nd | 3.8 mph 6.1 km/h | 5.0 mph 8.0 km/h |
| 3rd | 6.3 mph 10.1 km/h | 8.1 mph 13.0 km/h |
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket rims are bolt-on for easy replacement.
PCCS lever controls for all directional movements. Pushing the
PCCS lever forward results in forward machine travel, while pulling it
rearward reverses the machine. Simply tilt the PCCS lever to left to
make a left turn.
Hydrostatic Steering System (HSS) is powered by steering planetary
units and an independent hydraulic pump and motor. Counterrotation
turns are also available. Wet, multiple-disc, pedal-controlled
service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
| Minimum turning radius | 6'6" | 1.99 m |
| Suspension | Oscillating equalizer bar and pivot shaft | |
| Track roller frame | Monocoque, large section, durable construction | |
| Rollers and idlers | Lubricated track rollers | |
| Track shoes | Lubricated tracks. Unique seals prevent entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun. | |
| Number of track rollers (each side) | 7 | |
| Type of shoes (standard) | Single grouser | |
| Number of shoes (each side) | 41 | |
| Grouser height | 2.8" | 72 mm |
| Shoe width (standard) | 22" | 560 mm |
| Ground contact area | 5295 in² | 34160 cm² |
| Ground pressure (with dozer, cab and ROPS) | 10.7 psi | 0.75 kg/cm² / 73.6 kPa |
| Track gauge | 6'7" | 2000 mm |
| Length of track on ground | 10' | 3050 mm |
| Fuel tank | 129 U.S. gal | 490 ltr |
| Coolant | 15.3 U.S. gal | 58 ltr |
| Engine | 10.0 U.S. gal | 38 ltr |
| Torque converter, transmission, bevel gear, and steering system | 15.9 U.S. gal | 60 ltr |
| Final drive (each side) | 6.9 U.S. gal | 26 ltr |
| Tractor weight: | ||
| Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. | 46,780 lb | 21220 kg |
| Operating weight: | ||
| Including Semi-U tilt dozer or straight tilt dozer, multi-shank ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. | 61,950 lb | 28100 kg |
| Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation. | ||
| Hydraulic control units: | ||
| All spool valves externally mounted beside the hydraulic tank. Plunger type hydraulic pump with capacity (discharge flow) of 195 ltr/min 51.5 U.S. gal/min at rated engine rpm. | ||
| Relief valve setting | 3,270 psi | 22.6 MPa 230 kg/cm² |
| Control valves: | ||
| Spool control valves for tilt dozer: | ||
| Blade lift | Raise, hold, lower, and float | |
| Blade tilt | Right, hold, and left | |
| Additional control valve required for multi-shank ripper: | ||
| Ripper lift | Raise, hold, and lower | |
| Hydraulic cylinders | Double-acting, piston | |
| Number of cylinders: | Bore | Bore |
| Blade lift / 2 | 3.9" | 100 mm |
| Blade tilt / 1 | 5.9" | 150 mm |
| Ripper lift / 2 | 5.1" | 130 mm |
| Hydraulic oil capacity (refill): | ||
| Straight tilt dozer | 17.7 U.S. gal | 67 ltr |
| Semi-U tilt dozer | 17.7 U.S. gal | 67 ltr |
| Ripper equipment (additional volume): | ||
| Multi-shank ripper | 2.9 U.S. gal | 11 ltr |
KOMATSU
Name : KOMATSU
Service Tel : (8621)-6841-4567
E-mail :
Web Site : https://home.komatsu/en/
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
