Komatsu D65PXi-18 Bulldozer

Komatsu D65PXi-18 Bulldozer

Rated rpm 1950 rpm
Operating Weight
Send Inquiry

Cab Top GNSS Antenna

No blade mounted GNSS antenna(s), cables to worry about damaging with cab top GNSS antenna. Reduced risk of theft due to low visibility as viewed from ground level.

D65i-18  

Stroke Sensing Hydraulic Cylinders

Robust stroke sensing hydraulic cylinders employ proven Komatsu sensor technologies for accurate finish grade performance. Stroke sensing angle cylinder allows machine control system to know the angle of the blade.

D65i-18  

Auto Idle Shutdown

Komatsu auto idle shutdown automatically shuts the engine down after idling for a set period of time to reduce unnecessary fuel consumption and exhaust emissions. The amount of time before the engine is shutdown can be easily programmed from 5 to 60 minutes.

D65-18  

Enhanced Transmission Shifting

Select automatic or manual gearshift modes to suit the work at hand, thanks to Tier 4 Final improvements made to the shifting logic.  The D65-18 machine now offers faster, smoother shifting in automatic mode.  The ability to disable the auto downshift feature from the monitor in the manual shift mode empowers operators who prefer blade load control and shifting from a true manual mode.  Operators now have full downshift control  from the manual mode.


Selectable Working Mode

Working mode P is the mode aiming for powerful operation and maximum production and mode E for general dozing applications with adequate speed and power while saving energy. For CO2 reduction and energy saving, the monitor panel allows for switching the working mode with ease, depending on the work at hand.

P mode (Power mode)
With P mode, the engine outputs its full power, allowing the machine to perform the work requiring large production, heavy-load work, and uphill work.

E mode (Power mode)
With E mode, the engine outputs enough power for the work without delivering unnecessary power. This mode allows for energy saving operation and is suitable for the work on a ground where the machine may cause shoe slip and the work not requiring large power such as downhill dozing, leveling and light-load work.


Automatic Transmission with Lockup Torque Converter

A significant reduction in fuel consumption and greater power train efficiency are achieved by the automatic transmission and lockup torque converter. The automatic transmission selects the optimal gear range depending on the working conditions and load placed on the machine. This means the machine is always operating at maximum efficiency. The lockup mechanism of the torque converter is automatically actuated to transfer engine power directly to the transmission in travelling and usual dozing speed ranges. Locking up the torque converter results in 10% improved drive train efficiency.

D65-18  

Power Angle Power Tilt Dozer

A power angle tilt dozer blade with highly durable boxstructure frame is available as an option. This blade is available for the PX machines. The hydraulic tilt and angle function expands versatility and productivity in a variety of applications.


D65PX-18  

ECO Guidance

In order to support to optimum operation, the following 5 recommendations are displayed to improve fuel saving operation:

    1) Avoid Excessive Engine Idling

    2) Use Economy Mode to Save Fuel

    3) Avoid Hydraulic Relief Pressure

    4) Avoid Overload

    5) Use Automatic Shift Mode

 

The operator can access the ECO guidance menu to check the Operation Records, Eco Guidance Records, and Average Fuel Consumption logs.


Rear View Monitoring System

On the large LCD color monitor, the operator can view, through one camera, areas directly behind the machine. This camera can be synchronized with reverse operation.

D65-18  

Palm Command Electronic Controlled Travel Control Joystick

Palm command travel joystick provides the operator with a relaxed posture and superb fine control without operator fatigue. Transmission gear shifting is simplified with thumb push buttons.

D65-18  

Standard High Debris Climate Control Package

The D65-18 offers improved heating and cooling performance in high debris applications.  A wide core A/C condenser, cab air filter precleaner, and relocated coolant overflow tank are now standard to ensure reliable HVAC performance in high debris applications.


Automatic shift mode

Select for all general dozing. When a load is applied, the transmission automatically shifts down, and when the load is off, it automatically shifts up to a set maximum gear speed. This mode economizes both fuel and production further when the torque converter lockup mechanism is actuated according to load, providing a one-to-one drive.


Manual shift mode

The mode for dozing and ripping rough ground. When enabled, the transmission automatically shifts down when a high load is encountered, but does not shift up when the load is off. The operator can specify whether the auto shift down function is enabled or disabled in manual gearshift mode by selection in the monitor.

D65-18  

Hydrostatic Steering System (HSS)—Smooth, Powerful Turning

The engine power is transmitted to both tracks without power interruption on the inside track for smooth, powerful turns. Counter-rotation while in neutral is available for minimum turning radius providing excellent maneuverability.


Integrated ROPS Cab

The D65EX/PXi-18 has a strong integrated ROPS cab. High rigidity and superb sealing performance sharply reduce noise and vibration for the operator and helps prevent dust from entering the cab. This provides the operator a comfortable working environment. In addition, side visibility is increased because additional external ROPS structure and posts are not required. Outstanding visibility has been achieved.


D65PXi-18  

Air Suspension Seat

New operator seat is equipped with lumbar support, tilting adjust function and electric heater. It is easy to adjust to the operator's shape and various working conditions and provides for comfortable operation. Also standard seat heat makes it possible to work comfortably in the winter.

D65-18  

Engine

Model
Komatsu SAA6D114E-6*
Type
4-cycle, water-cooled, direct injection
Aspiration
Komatsu variable geometry turbocharged, air-to-air aftercooled
Number of cylinders
6
Bore x stroke114 mm x 144.5 mm4.49" x 5.69"
Piston displacement8.85 ltr540 in³
Governor
All-speed and mid-range, electronic
Horsepower:

SAE J1995 - Gross164 kW220 HP
ISO 9249 / SAE J1349 - Net162 kW217 HP
Rated rpm
1950 rpm
Fan drive type
Hydraulic
Lubrication system:

Method
Gear pump, force lubrication
Filter
Full-flow
*EPA Tier 4 Final emissions certified

TORQFLOW Transmission

Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.

Travel speedForwardReverse
1st3.7 km/h
2.3 mph
4.5 km/h
2.8 mph
2nd5.6 km/h
3.5 mph
6.7 km/h
4.2 mph
3rdL7.3 km/h
4.5 mph
8.7 km/h
5.4 mph
3rd11.3 km/h
7.0 mph
13.6 km/h
8.5 mph

Steering System

Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.

Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedalcontrolled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.

Minimum turning radius:

D65EXi-181.9 m6'3"
D65PXi-182.2 m7'3"


Undercarriage

SuspensionOscillating equalizer bar and pivot shaft
Track roller frameMonocoque, large section, durable construction
Rollers and idlersLubricated
Track shoesParallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.

Final Drive

Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.

Hydraulic System

Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting27.9 MPa / 285 kg/cm²4,050 psi
Control valves:

Spool control valves for straight tilt dozer

Positions:

Blade lift
Raise, hold, lower, and float
Blade tilt
Right, hold, and left
Rear attachment
Raise, hold, and lower


Service Refill Capacities

Fuel tank415 ltr109.6 U.S. gal
DEF tank23.5 ltr
6.2 U.S. gal
Coolant49 ltr12.9 U.S. gal
Engine30.5 ltr8.1 U.S. gal
Torque converter, transmission, bevel gear, and steering system48 ltr12.7 U.S. gal
Final drive (each side):

D65EXi-18
16.5 ltr4.4 U.S. gal
D65PXi-1822 ltr5.8 U.S. gal



Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China