| Rated rpm | 1900 rpm |
|---|---|
| Operating Weight | 32070 kg 70,702 lb |
9.5 mm 0.375" thick guarding protects the sides and rear of the fuel tank and hydraulic tank from damage and debris.
Additional perforated material increases air flow to the radiator and prevents large airborne materials from entering the engine compartment.
These sheet metal guards are welded to the perimeter of the engine compartment doors, providing an overlapping barrier against material intrusion into the engine compartment.
Front striker bars are designed to prevent debris from riding up on the tracks and damaging the chassis or cab glass. The bolt-on design allows for easy servicing.
The 1682 kg 3,708 lb for the PX model and the 2000 kg 4,409 lb for the EX model counterweight optimizes machine balance for landfill applications.
The hydraulic oil cooler is relocated to the rear to increase cooling efficiency. It features a flexible core heat exchanger for easier cleaning and maintenance.
The AC condenser is mounted to the roof to protect it from debris and to increase cooling efficiency.
The thermal guard covers the exhaust manifold, hot side of the turbocharger, KDPF, and SCR system, reducing the potential for combustible debris to come in contact with hot surfaces.
A protective screen is added to the standard centrifugal engine air pre-cleaner to remove large particles from the air before they reach the filter elements.
The electric winch located on the inside of the main frame lowers and raises the underguard, providing easy access to the engine compartment for cleaning accumulated trash.
The two-piece radiator guard doors allow access to the standard wide-core radiator for cleaning. Adjustable fan reversing interval and duration allow the operator to concentrate on productivity, while helping to keep the radiator clean.
The two hood-mounted lights are replaced with four LED work lights mounted high on the blade lift cylinders, casting light over the trash rack.
The see-through vertical bars of the trash rack are designed to ensure good operator visibility. The trash rack and blade are both painted matte black to reduce glare.
The optional, cab air-filtration system provides pre-cleaned, filtered air to the HVAC system. The cab is pressurized to minimize odors and dust.
| Model | Komatsu SAA6D125E-7* | |
| Type | 4-cycle, water-cooled, direct injection | |
| Aspiration | Komatsu variable geometry turbocharged, air-to-air aftercooled | |
| No. of cylinders | 6 | |
| Bore x stroke | 125 mm x 150 mm | 4.49" x 5.69" |
| Piston displacement | 11.04 ltr | 674 in³ |
| Governor | All-speed and mid-range, electronic | |
| Horsepower: | ||
| SAE J1995 / Gross | 199 kW | 267 HP |
| ISO 9249 / SAE J1349* / Net | 197 kW | 264HP |
| Rated rpm | 1900 rpm | |
| Fan drive type | Hydraulic | |
| Lubrication system: | ||
| Method | Gear pump, force lubrication | |
| Filter | Full-flow | |
| **EPA Tier 4 Final emissions certified |
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase and a planetary gear, multipledisc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
| Travel speed: | Forward: | Reverse: |
| 1st | 3.3 km/h 2.1 mph | 4.4 km/h 2.7 mph |
| 2nd | 6.1 km/h 3.8 mph | 8.0 km/h 5.0 mph |
| 3rd L | 7.8 km/h 4.8 mph | 9.2 km/h 5.7 mph |
| 3rd | 10.1 km/h 6.3 mph | 13.0 km/h 8.1 mph |
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
| D85EX-18 | 2.0 m | 6'6" |
| D85PX-18 | 2.2 m | 7'3" |
| Suspension | Oscillating equalizer bar and pivot shaft | |
| Track roller frame | Monocoque, large section, durable construction | |
| Rollers and idlers | Lubricated | |
| Track shoes | Lubricated tracks. Unique seals prevent entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun. | |
| Number of track rollers (each side) | 8 | |
| Type of shoes (standard) | Single grouser | |
| Number of shoes (each side) | 45 | |
| Grouser height | 72 mm | 2.8" |
| Shoe width (standard) | 910mm | 36" |
| Ground contact area | 63340 cm² | 9,820 in² |
| Ground pressure (with dozer, cab and ROPS) | 0.40 kg/cm² 39.8 kPa | 5.77 psi |
| Track gauge | 2250 mm | 7'5" |
| Length of track on ground | 3480 mm | 11'5" |
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement. Triple labyrinth protects seals and improves durability.
| Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation. | ||
| Hydraulic control units: | ||
| All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 331 ltr/min 87.4 U.S. gal/min at rated engine rpm. | ||
| Relief valve setting | 22.6 MPa | 3,270 psi |
| Control valves: | ||
| Spool control valves for semi-u tilt or straight tilt dozer | ||
| Positions: | ||
| Blade lift | Raise, hold, lower, and float | |
| Blade tilt | Right, hold, and left | |
| Rear attachment | Raise, hold, and lower |
| Fuel tank | 470 ltr | 124.1 U.S. gal |
| DEF tank | 23.5 ltr | 6.2 U.S. gal |
| Coolant | 65 ltr | 17.2 U.S. gal |
| Engine | 38 ltr | 10.0 U.S. gal |
| Damper case | 1.6 ltr | 0.42 U.S. gal |
| Torque converter, transmission, bevel gear, and steering system | 60 ltr | 15.8 U.S. gal |
| Final drive (each side) | 36 ltr | 9.5 U.S. gal |
| Tractor weight: | ||
| Including ROPS cab, rated capacity of lubricant, hydraulic control unit, coolant, full fuel tank, operator, and standard equipment. | 25700 kg | 56,660 lb |
| Operating weight: | ||
| Including SEMI-U (EX) or straight tilt dozer (PX), landfill counterweight, rear striker bars, standard waste handler equipment, ROPS cab, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank. | 32070 kg | 70,702 lb |
KOMATSU
Name : KOMATSU
Service Tel : (8621)-6841-4567
E-mail :
Web Site : https://home.komatsu/en/
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
